Discussion Locked

Blue error screen

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

when installing windows XP professional on my new computer, I am getting a blue screen error which states "Stop: 0x0000007f" "beginning dump of physical memory"....I have checked the RAM, and formatted the hard drive, and I continue to get the same message.......

Canm someone please give an Idea as to what the issue might be with the install

1 reply

by wcp

The cause has to be hardware because the BSOD appeared during Windows installation.

1. Uninstall all non-essential HW ? NIC, modem, USB, Firewire, card reader, for example.

2. Disconnect non-essential cable to the MB ? Audio, USB, Firewire, for example.

3. BIOS ? Set the BIOS to default. Set the CPU and RAM frequency correctly.

4. CPU fan ? Replace the fan if it turns sluggishly or CPU temperature is high (Check the temperature in the BIOS).

5. RAM ? Match the speeds if there is more than one RAM.

6. RAM and HD diagnostic test ? Make sure they passed the tests.

7. Video (if not on-board) card ? Try a different one.

8. CPU or MB ? If you still has the problem, the cause is by now either CPU or MB. Do the test using UBCD. Refer to http://tinyurl.com/ox6v

If you are not sure, take your system to a service place.

This discussion is closed to new replies.