Discussion Locked

Blue Screen of Death upon log in each mo

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My network connected HP Kajak (333 MHz, dual processor) frequently crashes upon restarting each morning. After the restart, I log in and just as I connect to the network I get the BSD with these error messages:

STOP 0x0000001E (0xC0000005, 0x80003E2B, 0x00000001, 0x00000030)
KMODE_EXCEPTION_NOT_HANDLED Address 8003E26 has base at 80001000 hal.dll

Dll base directory Date Stamp Name
ntoskrnl.exe hal.dll

And the rest of the memory dump I've snipped.

This has happened intermitently during the two years I've had the machine. It now
seems to happen several times a week.

I use the machine heavily--Lotus e-mail, Microsoft Office 97, Pro/ENGINEER, Pro/PDM, Exceed X Window emulation all run concurrently.

Any ideas to stop this BSD?

Thanks,

Jeff Smith

4 replies

by mckaytech

The error messages indicate that the problem is in the HAL.DLL module and that is one of the five components of the NTOS that is different for a multi-processor machine. (NTOSKRNL.EXE) is one of the others, by the way.

I'm not familiar with how HP implements the multi-processor kernel but I've had a few problems on dual-processor Compaq machines when the modules were mismatched (for example, a Service Pack replaced four of them but one was still an older version).
There is a known problem with the setup.log that tells a Service Pack which modules to install and that might be part of the problem.

I would probably start by hitting the TechNet site, search on multi-processor and get the cuurent list of file versions. Then compare yourfile versions and probably involve HP at that point.

paul

by sygnatech

I'm not sure if you have tried this, but if you have some spare memory or a similar machine, try reseating or swapping out the RAM and see if that fixes it. I have had faulty memory cause random BSD's in the past. -- Jim

This discussion is closed to new replies.