Question Locked

Bluetooth Modem Headache

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I own an HP ipaq 614c business navigator,it runs windows mobile 6, it really is a very useful piece of kit but there are a few disappointing features, one is that the mobile phone feature is rubbish, the ringer is nowhere near loud enough and using the device as a phone flattens the battery in a matter of a couple of hours.
Therefore I want to use the bluetooth function to connect the ipaq to the internet via my Samsung mobile phone, the trouble is I have followed the instructions a thousand times and I cannot get the thing to connect to the internet unless I put the sim card in the ipaq.
I can "see" the phone as a bluetooth dial up connection but the setup procedure demands that a dial up phone number be inserted, since the phone has an "always on" connection there is no phone number to be dialled.
Anyone know what I'm doing wrong?

3 replies

by older mycroft

Even way back then, in Glasgow, I had a telephone number that had to be 'dialled' by the modem to enable connection for data transfer. It took the form of the standard STD format: 0141556xxxx

I reckon that you'd need a Dial-Up ISP telephone number, and that's what the system is asking for. ;)

by Former member

Then you will have to put in the network ip's address and "http" and what port you want to go through, a pain in the backside but i have done it once, it worked, but i have forgotten the exact details. But i think you will have to select the pair up option and to have the bluetooth to act as the wireless internet through your phone. Just off the top of my head.

Please post back if you have anymore problems or questions.

This discussion is closed to new replies.