Discussion Locked

Boot order for an IBM

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
OK, I have an IBM PC 300GL that I can't figure out how to change the boot order from Diskette to Hard or CD.

3 replies

by bfilmfan

As documented in ftp://ftp.software.ibm.com/pc/pccbbs/commercial_desktop/p06p8678.pdf

1. Turn off your computer.
2. Turn on your computer.
3. When the Configuration/Setup Utility program prompt appears, quickly
press F1. The prompt appears for only seconds.
4. From the Configuration/Setup Utility menu, select Start Options.
5. From the Start Options menu, select Startup Sequence.
6. Under Primary Startup Sequence, select First Startup Device.
7. Note the device currently selected as the first startup device and write it
down for future reference. You must restore this setting when you finish.
8. Change the first startup device to your CD-ROM or DVD-ROM drive.
9. Press Esc until you return to the Configuration/Setup Utility program
menu.
10. Select Save Settings and press Enter before you exit from the program.
11. Turn off your computer.

by tx old sarge

And they wonder why I hate IBM. I sawit as a title for the listings under it not as an option. Rough week! Thanks a million or in this age a billion for inflation. ;-)

This discussion is closed to new replies.