Discussion Locked

BorderManager and VPN connectivity

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey all!

Here is my problem. I have been charged with connecting our VPN with our parent company this week. Problem is they do not use any Novell products at all let alone BorderManager. Currently they use Raptor for their VPN server and we use BMEE 3.5. They also use IKE for key management, which BM does not support.

I know Novell does not support 3rd party VPNs but does anyone here have any ideas? I'd really hate to go to my company and tell them what we have won't work.

Thanks in advance!

5 replies

by wcraigmiles

Why not create a VPN between the routers?

You could install VPN software on the clients and let them connect to corporate separately.

Raptor does support other key systems that BM does support.

Install a firewall appliance like firebox or pix. Set that to connect traffic between the two.

by ssutton

We need to have servers talk to each other. This issue is being addressed now by using a separate box for VPN connectivity. We're going to keep BM's VPN for client to site communications.

Thanks for the info!

by raymond wong

Hi,

Use VPN clients on the workstations.
You will need to use the BM's default VPN filter exceptions to allow VPN traffic to pass through.
But check beforehand that the VPN supports NAT (assuming you are using one).

by ssutton

We need to have servers talk to each other. This issue is being addressed now by using a separate box for VPN connectivity. We're going to keep BM's VPN for client to site communications.

Thanks for the info!

This discussion is closed to new replies.