5 replies
I am assuming that since you've dicovered the UDPs you should also be able to disclose the port number. This may then give you an indication of the application causing the flood.
You can also trace (debug) UDP packets from a Cisco router.
Yourbest bet is to place a sniffer on the network. Since you are switching, you'll need to narrow down the source by spanning the ports.
by dboeshaar
by netwill
put Sniffer on one the port on the switch or turn on Network Monitor on NT server
have it set to capture broadcast packets
analyze the packet for source Ip address
see what is running on the host with souce IP address and troubleshoot
by dboeshaar
by dboeshaar
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending