Discussion Locked

Browsing servers on the DMZ

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have 2 servers on a DMZ. How can I see them and access them in Network Neighborhood. I've added the entries for them on the DNS, hosts and lmhosts file. But it didn't help.

7 replies

by computerdude

First you need to configure your fire wall to allow at least netbios traffic ffom internal to the DMZ. Then you should be able to browse through network neighborhood. Hit entire network then you will see which type of network you have (Novell and/orMicrosoft) then you will see domains and workgroups. One of which should be the DMZ.

Dave

by mckaytech

A DMZ is created specifically as a security measure to protect the internal network so by design, there is not a route between the two. That's why it's a DMZ and not just another subnet and it's also why setting up name resolution doesn't work.That way, if someone hacks a server in your DMZ, they still don't have a way into your internal network.

I would be very cautious about opening up your firewall unless there is a clear business benefit and you have a plan to manage the additionalrisk.

paul

by computerdude

I aggree with the above but the idea is to ONLY open the services needed and only ONE way, from internal to DMZ. Not at all from DMZ to internal. If he did not need to at all he would not have asked the question.

Dave

This discussion is closed to new replies.