Discussion Locked

BSOD after repair

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Having some trouble with display drivers and other things on an XP PC, I decided to try a Windows repair. This was an OEM installed XP (no CD) so I used a CD "belonging" to another installation. Everything seemed to go well, and after finishing the install app rebooted. Instant result: BSOD with error 7B. One of the error parameters is 34, which according to MS indicates typically indicates "Disks or storage controllers that are failing, defective, or improperly configured or storage-related drivers or programs (tape management software, for example) that are not fully compatible with Windows XP Professional". This seems to me a little surprising, since Windows has just finished installing on the same HD it should boot from.

I can see that the HD is accessed a few times before the BSOD. I am able to boot from the Windows CD and access the repair console, so I can get at the disk that way, but I have no idea what to do. I have read lots of MS texts concerning the 7B error, but they point in too many directions to be of any help.

Any ideas or suggestions are welcome! I'm stuck. :-(

Sven

1 reply

by jdp

After changing BIOS setup to allow boot sector access my Win XP installation turnout sucessfully.

J?rgen D. Pedersen
DataRespons

This discussion is closed to new replies.