Discussion Locked

Cabling ?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

may be its illy ques "10/100 baseT" Ethernet twisted pair has 8 wires in total .
1 = Transmit
2 = Transmit
3 = Receive
4 = Not used
5 = Not used
6 = Receive
7 = Not used
8 = Not used
Total 4 wires used 4 available for anything else??

5 replies

by mshavrov

Ethernet 10/100-TX uses only 4 wires as you described. But another technologies, for example, 100/T4 uses all 8 wires and it use another wirind diagram. Generally those "unused" wires are used as "shield".

by kevin anderson

Correct. In 10/100 base T they aren't directly used. What they provide though, is cancellation of crosstalk between the active wires.

If you want, you CAN run a second connection through ine cat5 cable. But it isn't in spec, and it isn't recommended. Expect collisions as indicated below.

If you're thinking "can i run 100 Meg over CAT3" or something like that where you only have 4 wires, the answer is yes, but it won't be as clean as Cat5. You are likely to have crosstalk problems leading to corrupted packets (which will be retransmitted). This may or may not be acceptable depending on your circumstances. I'd say try it, and go from there.

Kev.

This discussion is closed to new replies.