Question Locked

Can someone help Me with Window XP?

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi
I have installed Windows XPS3, but the internet is not working. There is no problem with my modeam or network card because internet work when I install Windows 7 or Vista. When I install XP even it cant detect the network connection icon, it should give me the option to setup a network at final steps of instalition, but it not.
Thanks in Advance

18 replies

by oh smeg

Left clicking on Start, then Right Click on My Computer and left click on Proprieties from the Drop Down Menu, when the next Window Opens left click on the Hardware Tab and then left click on Device Manager.

You then need to install any missing drivers. [i]Missing Drivers are denoted by a Yellow Triangle with a Black Exclamation Mark through them.[/i] Until your Ethernet Driver is installed Windows [b]Can not[/b] ask you to setup a Connection. ;)

Col

by sanwardak

I installed a second Network card on pci slot and it working now. I thisnk The problem is on the on borded network card because my friend has the same problem, so I will try to install a second network card on a slot.
Thanks

by who am i really

unless the system has an NIC from before 1999 - 2000 it won't be directly "supported" or even recognized by XP and will require the drivers provided by the Mfg of the NIC.
device manager can't tell you the brand or model etc, of the NIC if it's not supported or recognized,
hopefully you have a CD with the drivers
if the NIC is integrated on the MB then the drivers will be on the MB CD

by sanwardak

Hi,
I bought this pc used one the NIC is integrated on the MB, I dont have the CD. I am surprise why vista and windows 7 is connecting to net, but XP not. Some of application not work well with vist and windows 7 that is why I need to use XP.
Thanks Anyway

by oh smeg

All you need do is visit the M'Board Makers Web Site and download the latest drivers for this M'Board. If it is a System Makers System like HP, Dell or so on you just need to visit their Web Site for the Drivers.

You [b]Do Not[/b] need to original Driver Disc just the Make & Model of either the Computer or M'Board to get the drivers. ;)

Col

by sanwardak

Hi,
I have tryed this, but it didn't work. When I give ipconfig,ipconfig/renew, ipconfig/release or ipconfig/all it giving my the following masseage. "windows IP configuration" but it not work. There is no conflict or red queastion mark on my network adopter. Do you know how I can uninstall network controler in device manager? When I try to uninstall the network adopter it cant it says "window might need this for bootingup" something like this.
Thanks

by sanwardak

Hi,
I have reinstall like 4 or 5 times, but it didn't work for me.
Thanks

by ron k.

Is there a question mark for your network connection/card? Are you using the connection on the motherboard or a separate NIC? What is the specific make and model of the computer/network interface card?

by sanwardak

when I click Network adopter + it show the following

Network adopter
Direct Parallel
Wan Miniport (IP)
Wan Miniport (IP)-pakete schduler Miniport
Wan Miniport (L2tp)
Wan Miniport (pppoE)
Wan Miniport (pptp)
All the above has network adopters icons. None of these allowing me to uninstall it says "Failed to uninstall this Device. This Device may need to boot the computer"
Also the Etherenet Controler and Multi media Audio Controler has yellow queation mark. they are located under + other Devices.
Iam using Pentum 4 Network adopter is on the motherboard, but I dont know the model of the network adopter because when I click on it properties it doesnt show the info. I have second pc I have XP istalled there and both are connected to the same Gateway, Sorry berfor in my queation I said Modeam, but it is Gateway, which I can connect fur Pcs. Reset that also but that pc work this one not.
Thanks

by peconet tietokoneet

Install your motherboards drivers disk for your internet connection to work. If you do not have the drivers for your motherboard then get on another computer and download the drivers for your motherboard.
Hope all goes well.

by sanwardak

Network adopter
Direct Parallel
Wan Miniport (IP)
Wan Miniport (IP)-pakete schduler Miniport
Wan Miniport (L2tp)
Wan Miniport (pppoE)
Wan Miniport (pptp)
All the above has network adopters icons. None of these allowing me to uninstall it says "Failed to uninstall this Device. This Device may need to boot the computer"
Also the Etherenet Controler and Multi media Audio Controler has yellow queation mark. they are located under + other Devices.
Iam using Pentum 4 Network adopter is on the motherboard, but I dont know the model of the network adopter because when I click on it properties it doesnt show the info. I have second pc I have XP istalled there and both are connected to the same Gateway, Sorry berfor in my queation I said Modeam, but it is Gateway, which I can connect fur Pcs. Reset that also but that pc work this one not.
Thanks

by oh smeg

You need to use the M'Board Driver that is available on the M'Board Makers Web Site. So if you have a ASUS M'Board you would visit the ASUS Web Site and download the Drivers for your M'Board, if you have a Gigabyte M'Board you would visit the Gigabyte Web Site and so on through the Different M'Board Makers.

The devices that are showing as installed that you can not uninstall are not the actual Ethernet Adapter they are part of the M'Board and not connected with this function directly at least. ;)

Col

by ron k.

Really.
I understand that some plain-jane boxes don't have a make and model number on them but there is utility software than can help identify the equipment you are using. One such program is Belarc Advisor, available here: http://belarc.com/free_download.html
Download the software onto the computer you're using to post to TR and then use whatever method you have available to copy it over to your 'bad' computer.
When you run Belarc you'll see information about the motherboard on the right side under the heading, 'Main Circuit Board'. You should also have your network interface info under the heading, 'Communications' on the left side, further down. Copy and paste that info to a post here and we may be better able to assist you.

by oh smeg

If you need to install Drivers to get something working it's useless. When you hit a situation like that use Unknown Device Identifier to identify your Hardware. ;)

http://www.zhangduo.com/udi.html

Col

by ron k.

I wasn't 100% sure that it wouldn't work so I let it ride. Now I know.

This discussion is closed to new replies.