Discussion Locked

Can Windows NTServer 4.0 be used as a ga

0 helpful
87 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are using Server 4.0 on a local network. Three machines access this as a file server. The machine has 2 NIC cards one is a thin net (BNC) the other is a RJ45 NIC that is used for internet access. From the server I can see the whole network (including the local network) but from the three machines on the local network I can only see them and the server. They will not see the whole network. I know that installing a mini hub would take care of it but they want access now. (no money until the 1st of theyear) Can anyone help.

Thanks
Will

87 replies

by bspisak

I'd suggest checking out an inexpensive package called Wingate. I've seen this used at small businesses before (though my own preference is for an Ascend router at the front of the network) and it does the job nicely. You mention 3 workstations, which would fit nicely in Wingate's pricing scheme for their Standard small business package, priced at $80. Wingate acts as a proxy server for a multitude of traffic types, including Telnet, VDOLive, RealAudio, WWW of course, and others. Their website is www.wingate.com.

by yzer

Hi Will,

Just to let you know, I agree with the answer regarding Wingate. I am currently testing Beta 3.1, and find it to be a great program.

Ken

by bryan

Wingate has known security flaws which could allow hackers to steal your private info, use your server for attacks on other internet sites, etc.

I suggest Sygate, found at www.sygate.com

These solutions assume you only have one valid Internetaddress. If your ISP has given you enough valid, routable IP addresses for the server and all clients, you could just open TCP/IP properties on the server and check the box to enable routing. This turns your NT server into a mini-router.

Doing the above exposes both the server and the client machines to any number of security risks from the internet, however.

-bryan3@trdesk.com

by tinwaldnz

I used MS Proxy Server 2.0 to achieve this. I'll admit up front that you need to review the security on your server and clients and monitor the net for new security holes in Proxy Server. As is nexessary for all products. Having said that, it works well as a gateway for companies tied to the MS product range. We had Wingate earlier, but security and lack of scalability led us to try Proxy Server.

by stormyron

All three workstations must have the IP Address of the router in the default gateway entry and the and the route IP box selected in the routing tab.

by rawright

We have 14 users on a single NT4 server running Proxy Server 2.0. It works great, and configuring RAS to dial on demand gives all of our users near-seamless access to the 'net. The only hassle is in trying to use internet mail, which is actually aproblem with our ISP, not NT.

by bschorr

We use Proxy Server for that need, but it might not suit your purposes because it does require a little $$$ to get into.

Stormyron's solution is the cheapest in cash, but be forewarned - you have practically NO security if you do that. Anybody who wants into your network can come in if you just enable IP routing and leave it at that. I wouldn't advise it.

Aloha,

-Ben-

by sudekumd

By far your best solution is Mircrosofts Proxy Server. Now I realize that your IT budget is locked unitll the first of the year but it is the safest solution. All other "proxy" type solutions while they work as advertized leave too amny security worries and a lot of time lack enough scability to allow your company to grow much. I tend to agree that the proxy server is the way to go.

by joeh

Hi Will,

Here is a method that I have used. You download and install MS Proxy Server on the system with the 2 NIC's. Let that system act as the hub for the others systems. This can be done, by using IP addresses of 192.168.x.x as a private network address. This IP range has been established to use as a private network. You assign those IP addresses to your systems internally, and to the second NIC on your server. Then you configure the primary NIC on the server with a normal IP address. The client systems on your network will will connect to the second NIC on your server and use that as the proxy server to the Internet. Hope this helps.

Regards,
Joe

by espanas

A year ago, I was in the same situation that you are now. Fortunately, I have a friend who owns an ISP business. He recommended a webramp unit (http://www.rampnet.com/)
Webramps price ranges from $299.00 to $900.00 depending on their features. They are very easy to install. There is virtually no maintenance on it. One of webramp's best features is that it has a built-in modem that runs at 56K and it can handle modem polling. You can also buy a unit that works with ISDN. I bought one andlater I decided to install Proxy Server and it works fine with it. I was impressed with their versatility, low cost, low maintenance, and technical support.
Best regards.

by driezas

Well, there is no need of proxy server, if your server have two network cards with different IP addresses. One card, which is connected to your ISP have external IP. another card is connected to internal LAN and must have IP address from the same networkas other workstations connected to internal LAN. Then you must provide gateway address on all workstations. Write there internal address of your server with two network cards and enable on server IP address routing. If you wish faster WWW accessor something then you can install Wingate or something else.

P.S. Sorry for my English :)

by driezas

Run this command at the sheduled time, but take care it shutdowns windows immediately, without prompting to save data.

rundll32 krnl386.exe,exitkernel

or run regedit.exe and edit HKEY_USER\.DEFAULT\Control Panel\Desktop and add value AutoEndTasks REG_SZ. Set it to 1.
Edit HKEY_USER\YourUserId\Control Panel\Desktop and add value AutoEndTasks REG_SZ. Set it to 1.

This forces any task, that does not respond to the shutdown, to end.

You can also Add Value of WaitToKillAppTimeout with type REG_SZ.
The default: is 20000 milliseconds (20 seconds). If the user process does not end by this time, AutoEndTasks is invoked.

by bkidd

Look for a proxy server program to download for the NT server. This will allow your workstations to share the internet conncection.

by fernando_rigonan

try downloading winproxy 2.1 30 days trial for unlimited number of users and until you have no budget reinstall again after 30 days...

fernando

by ghary

Hi.
I had an nt setup that had two pc.s connected and able to take 1 phone line incomming ..

There is a little regestry edit that will allow this ( providing all else has been set properly )

You should be able to get the file of the internet ..

by mpopovich

You might be able to do the following without spending money and providing instant access.

Network security is a huge issue though.

The internet NIC should be configured for the Internet like you have it with it's gateway to the ISP.
The BNC's TCP/IP should be on a private network configuration such as 192.168.1.0 with a class C subnet (255.255.255.0)
Enable RIP on the server. This should route all of your Internet traffice out.
Since this server is a BDC I would NOT do this ever. But with no money and you need it now this will do it.

When you get money buy something like MS Proxy and go from there. If you implement Proxy then install it on it's own server in a seperate Domain and create a one way trust, with the network trusting the Proxy Domain. This generally takes care of any network security issues that anyone would have and only the Proxy server would be exposed to scrutiny and attack. Despite what others might say Proxy 2.0 is a decent gateway and firewall, although there is some

by ectrevore

The only solution is to wait until you have the budget and purchase a product like MS Proxy 2.0, install it on a separate Server in a different Domain. Create a one way trust relationship and close all ports that will not be used. Additionally, I wouldrecommend renaming the Admin account, assigning it at least a 12 digit alpha numeric password and creating a dummy, highly monitored administrator account. Of course this is just the beginning of creating a secure connection to the Internet.Yes, other solutions would work. But, is it really worth the risk of losing all your data (file server) just to do a little surfing? If you need a quick, safe and cheap connection to hold you over until the budget is approved, then I would recommend getting an ISP and installing a modem in one (or all) of the clients. This way each user can connect, just not at the same time. This may not be an ideal solution, but I am very anal about security.

Eric C Trevore -MCSE+I
MS/LAN Engineerectrevore@issd.com

by wayne.meadows

The server should have one NIC configured with the IP Address that was supplied by your ISP and one NIC configured to use your internal IP Addressing scheme.

Enable RIP (Routing Information Protocol) on the server.

Of course, this provides no security and I wouldn't recommend that you do it this way, but it is a cheap and valid way to do what you are asking.

If it were me, I would purchase an additional server and install PROXY server which would not only give you a level of securitybut wouldalso allow you to cache the web pages for faster download.

Good luck!

by techwan2b

Just to support answer #3. You don't specify the size of your connecting network, but for a 3 user instant answer Sygate from www.sygate.com works absoulutely wonderful. We are using this on a 3 user peer-to-peer network and have had no major problems with it.

by hdoan

You can use RAS and Routing (free download from Microsoft) and configure the IP address for the NIC that connects to the Internet as the default gateway. Other servers must have private IP addresses.
For example:
File server's 10BaseT NIC IP assigned by the ISP is 209.100.100.1
File server's BNC NIC IP private IP 192.168.100.1
From RAS and Routing Admin, create a routing entry as following:
Destination: 0.0.0.0
Network mask: 0.0.0.0
Gateway: 209.100.100.1

Assign other 3 machines the same private subnet.
Machine 1 IP 192.168.100.2
Machine 2 IP 192.168.100.3
Machine 3 IP 192.168.100.4
Set the default gateway for all machine pointing to 209.100.100.1

These 3 machines access the local area network via thin net and access the Internet via the server's 10BaseT.

by danny.macdonald

I like to rule out the simple things first so forgive me if I seem to simplistic.
Is IP forwarding enabled on the PC?
Is RIP installed as a service?
Can you ping the NIC attached to the internet?

by bosborne

I have used Proxy Server 2.0 here as well, and it worked very well. I set it up in it's own domain, as Microsoft suggests, in order to cut down on hacks. I also monitor for proxy server security flaws, but we have used it for over 2 years with no knownproblems. Once you understand how to configure it, which is somewhat of a pain, it works well and is pretty configurable.

by warren_procompl

Hi Will,

You can use any proxy server software or you can simply use the following. Please note, that if you are using proxy software, you must follow the outlined procedures to detail as provided by the manufacturer.
Nevertheless, you can use the simple method outlined below:

Set the default gateway from each client as the IP address of the server
Enable IP routing from the TCP/IP properties on the server

by chrish

A low-cost harware solution is a webramp 700s. It is both a router and firewall. I had considered software solutions on Win32 and Linux, but realized that nothing would be as secure or a simple to administer as a small black box with two NIC ports.The cost is only $485. The setup took only 30min including plugging it in and administering routing through their browser interface and I haven't had to do anything to it since (nor had to call their support line but i hear it's pretty good). Can you tell I'ma happy customer?

by john.martinez

Pardon my typos...

Everyone wants to use a Proxy Server. How about Linux? It's free and comes with built in Firewall software.
You wil have to do some work to get to set it up, but it's well worth it if you are on a budget.

You need 2 NICs,recmopile the Kernel to support IP masquerading and probably more. It will work for Free (get it...)

It takes you step by step in a book called Netwroking with Linux. Very good book!

And a firewall is more secure than a proxy server. (but that's debatable too)

by billtm

Yes I have a free solution.

Go to a shareware archive and look for Proxy98 (its free for up to 6 users) I got it through www.networkdna.com. Set that up on your server, and you will have to configure each machine with a static IP address, and other TCP/IP settings to point to Proxy 98. This worked very well for me.

by gtourang

You can enable IP forwarding and still build a secure firewall. Download and install the RRAS service for NT and create Filters on the NIC connected to the internet. Unfortunately you need to create filters for each protocol and you would need registeredIP's for each machine. A Proxy application like wingate and MS Proxy will give you a firewall with NAT (Network Address Translation) with minimal configuration but at a cost.

by richtee

Answer #5 is the solution to use NT Server as your gateway for your local machines. BUT, I suggest you give thought to security before implementing the solution.

by aquarian

So many answers to choose from, but let me add a new one. WinRoute. It is a NAT, not a proxy, so there is less overhead on server. Cost is relatively low ($150 US, I think), and works in the same fashion as the lower end Webramp and Internet Station, but with all of the configurability of a true server :)

More info can be had at www.winroute.com.

If you are planing to go to a public domain (internet server), go either proxy or linux on seperate server and save yourself some $$$ and headache in the long run :)

by ken wolf

Will,
I agree with answer #27 from billtm@canoemail.com using Proxy98. I have used it and liked it very much. Best of all it is free for up to 6 users. It is very easy to setup and configure and supports all if not most of the popular protocols. As others have mentioned, you can configure NT Server as a software router, but with the security considerations, it would not be adviseable for an internet connection. Here is the link to the website to download Proxy98 http://www.zhanjiang.gd.cn/com/hooway/english.html

by antsoair

In order to go from 1 subnet to another ( intranet to internet )you need to enable RIP.

Click Start...Settings...Control Panel...Network. Click on the protocol tab select TCP/IP click on the routing tab select "enable IP forwarding"

This can expose your network to intruders. You can add some protection by adding Internet Information Server on your server and configuring the various security options. IIS is on the NT 4.0 option pack and can be downloaded from Microsoft for free. This is not the best solution but it is free.

by thom

Will,

With a limited budget until the first of the year, I would recommend getting the 120 day eval of Proxy server. Out of all suggestions, this is your best option for accessing the Internet. Make sure you setup all systems with compatible IPaddresses.

Thom

by pounce34

It is very easy to run an NT multihomed machine as a proxy server. The first thing you must do is make sure that your NICs on the NT machine can see each other. In the TCP/IP properties, make sure that the RJ45 NIC is named as the default gateway for the thinnet NIC and vice versa. Make sure you enable IP forwarding (IP Forwarding is flakey under NT; check for connectivity at this point, you should be able to ping both sides from anywhere on the local network. If you still can't, turn off IP forwarding and this may solve your problem- weird but true.)
The next thing you should do is run service pack 3 or greater for NT, and then install IIS 3 sp2. You can then install the proxy server. Use the SMS console to run all the web services you would like, and configure the Local Address Table (LAT) to include all your internal addresses. By default it should detect most of them anyway, but double check to make sure everybody is there. It this point you need to intall IE 4.01 or better on your clients. After thi

by markswhite

Many good solutions are offered. Answer #32 enabling IP forwarding on the TCP/IP properties does not install RIP. It enables static IP routing, where you manually add routes to the table. Routing Information Protocol is installed via the add/remove in services/network CP. It allows routers (be it an NT server or hardware device) to exchange routing information. Whenever you need a solution a good 1st choice is to consult the MS KB.

by jtking

The easiest way to get NT to act as a gateway is to use MS Proxy. It is real easy to setup and all you really need to do on the client machines is set the Gateway Ip and run a client .exe I'm not sure on the price of MS Proxy but you can download a trial of it to see if it fits your needs.
http://www.microsoft.com/proxy/downloads/proxy2.asp

by friedlander.b

WinProxy 3.0 from Ositis Software seems to work quite well. I am using it at home on a 3-computer LAN with all computers running Windows 98. It works quite well and is transparent to the subnet. This makes administration quite easy. It purports to work as well on Windows NT, but I haven't tested it yet.

by aneggaz

Sure you can !

There is 2 ways : your workstations have IP addresses so go to 1

1 -
Just install the service "RIP for Internet protocol" and validate the option "Enable IP forwarding".

Go to Control Panel --> Network --> Services click add and add "RIP for Internet protocol". After do not rebor yet. Go to TCP/IP Propetries Click the "Routing" Tab and then click "Enable IP forwarding"

2 - You have to install MS Proxy Server

by aneggaz

Sure you can !

There is 2 ways : your workstations have IP addresses so go to 1 if not go to 2

1 -
Just install the service "RIP for Internet protocol" and validate the option "Enable IP forwarding".

Go to Control Panel --> Network --> Services click add and add "RIP for Internet protocol". After do not rebor yet. Go to TCP/IP Propetries Click the "Routing" Tab and then click "Enable IP forwarding"

2 - You have to install MS Proxy Server

by ustutz

This may be trivial, but just in case: Have you enabled IP Forwarding (under network properties, TCP/IP properties, Routing)? If that doesn't do the trick, ensure your PCs are configured for TCP/IP and point to the NT servers thinLAN NIC IP address as the default gateway. Next check routes on the NT server (DOS prompt: netstat -r). You may need to add routes manually (using the route command). If that is the case - and you haven't used route before - you may want to email me for details.

by mmhas

Hi Will,

As per your configuration, your system have 3 NIC. The thin net (BNC) connected to the 3 machine and the RJ45 to another DCE / DTE (Is it right) to access the Internet. So in your case only 1 person can go to the net.

1st. thing to do:
In this WorkGroup environment, your config is OK and just to make sure all the PCs connected to your server can go to outside (Internet), just try ping from those PC to another PC in your LAN.

2nd. stage :
Browse through your server on the net and go to http://www.pscs.co.uk and download vsock##.exe (might be, there is latest version right now??), then install it in your server. Configure vsock as an NT Service, so you can just leave the software works for you. Then configure it under properties... see the manual instead of my instruction here... it's too much to type here.

3rd. Stage

Configure your workstation. Their 'gateway' should be your NT server IP Address and configure their IE or Netscape to use socks server... Pls take your time to read

by nealb

Either enable IP forwarding (provided you have registered IP addresses) or load a proxy server. -basically YES.

This discussion is closed to new replies.