Discussion Locked

cannot log on to network

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Cannot log on to the network on a Win95B machine. When I typed in the NT account, it prompt me that "cannot verfiy your account, no domain account find... " However, I can click on cancel to by pass it. and I can ping to the sever, and all the machines that are on the network. I can run the winipcfg, and I get all the IP address.
But I cannot browse the network neighborhood.
And all the network settings is set up correctly.

9 replies

by gjconely

If your network is a domain, then you may have to create a computer account on the domain. You can do that under the Server Manager tool.

by hannah

here is the exact message that I got
"the domain password you supplied is not correct, or access to your logon server has been denied."
However, I can see the computer on the list and I can ping to it from another machine .
From that Win95 machine, I can ping to other machines. and just not be able to browse from the network neighbour, and I cannot logon.

by squeakyzig

If you are running TCP/IP on this computer, you might try removing it, restarting, reinstall TCP/IP. Has worked for me in the past.

by hmileng

Why don't you check your permissions on the Server. Are you are member of the domain users. If you are getting the reply that the password is incorrect, then reset your password using user manager for domains and try logging in.
Good Luck,

by hannah

I did. remove all the network property and reinstall. I even create a new name, too. But still won't work.

by arg cio

access the internet? check to make sure the user account hasn't been locked out on domain controller? try another user account? are there other Windows 95B clients on this domain? Do you have the "Client for Microsoft Networks" installed, and configured? remove any .pwl files in the windows directory on Windows 95 PC, logoff, and try again. Did this help?

by cj_mcnix

I had the exact same issue on a Win95B machine. Happened when I tried to install a 3Com NIC in conjunction with the onboard adapter. (Turned out to be a data jack issue...so I removed the card). When I yanked the card back out, and removed references and protocols for it, I got your error. I tried removing bits and pieces, since I was afraid to remove the adapter for fear of having the wrong driver on me (it was an older Dell with a 3Com onboard adapter). I finally took the plunge and cleared it all out. Turned out my 3Com CD had the drivers. Remove EVERYTHING and start over. Adapter, MS Networking, TCP/IP. Remove it ALL! And remember...remove it all and then reboot.

by greggen

What NIC are you using in those Win95 machines? I had a simular problem with Win98 machines on a small NT NW. Was using Linksys NICs, and tried for a week to get the 3 new PC's on the network. When I broke down and bought 3com NICs everything worked perfectly

by erle williams

I have seen this problem before. Create an LMHOSTS file with the appropriate #PRE and #DOM settings and you will be able to login and browse the network.

Erle Williams

This discussion is closed to new replies.