Question Locked

Can't get DHCP to give addresses

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

For the life of me can't seem to setup my server.
I have 2 Nics for extra security and what is recommended for Remote Access.
This worked with SBS but I just installed windows 2003 server and want to setup remote access server and exchange 2007
I have the external card:
192.168.1.5 IP
255.255.255.0 Subnet
192.168.1.1 Gateway
68.87.76.178 DNS

Internal Card
192.168.10.5 IP
255.255.255.0 Subnet
no gateway
192.168.10.5 DNS

DHPC options:
003 router: 192.168.1.1
006 DNS server: 192.168.10.5
015 DNS domain name: company.local

There are no errors in the Event log to point to DNS issues or DHCP issues.
I can't ping either IP from any workstation. The server can get internet access
What could i be missing?

6 replies

by Former member

I have noticed that your "internal card" has no gateway address and also that the "DNS" is the same as your "IP". I might be wrong but on my system every card has their own dns and ip that are different to the next card.

by christophe0241

Where is the device routing traffic internally? I noticed the router at 192.168.1.1 but it would be handling the X.X.1.X network, where is the device handling the internal traffic? If there is no gateway for the internal card what is it connected to?

Sorry, I just need a good mental image of what all is happening before I can try to help.

by dabowers

Did you authorize the DHCP server yet?

If so . . . can you ping internal addresses fine?

by mmbc_voltron

I can ping the router, and both of it's own ip address. I can't ping the WS because it never got an ip address.

by mmbc_voltron

192.168.10.5 is the internal network (DHCP)
it gives off 192.168.10.50 - 100
I did add 192.168.1.5 as the gateway on the internal Nic to give it the routing it needs for external access.
I just think something is wrong with the software. I think i am going to go back to SBS I just need to see if i can still run exchange 2007 on it.

This discussion is closed to new replies.