Discussion Locked

Can't login onto Nt Workstation locally

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

One of our users lost mouse (pointer stopped moving) after closing a program. She came to me and asked for another mouse, the second mouse didn't work either.

I rebooted the system and login as myself and reinstalled the mouse drivers.
Logged out and seen the pointer moving again.

When she went to login herself it wouldn't let her. So I login as admin, the same thing happened. Try to login as myself as I did before loading the mouse, no luck.

Can anyone help us on this.

13 replies

by steve cody

Kind of a weird problem. Try booting with the Last Known Good configuration (Press the space bar during the initial bootup screen). This may undo whatever was done that is keeping you out. If that doesn't work, you may need to restore the accounts database with the ERD.
Is this a local login, or a domain login? What kind of error are you getting?
Also, make sure your problem is not related to a system lockup, instead of a mouse problem. Can you use the keyboard when the mouse quits?
Email more information if you want.

- Steve
scody@gulbrandsen.com

by chipmunk

Thanks Steve, I have the problem solved but it was related to someone changed the password.

by rraheb

OK, first check that the mouse and keyboard jacks are not switched (i.e. the mouse is physically installed in the place of the keyboard)....

If this is in place, then check that you are logging in as administrator on the local machine not on thedomain, does the keyboard work when the mouse stops working?

If so then try to login and see what happens....

Try to disconnect the mouse totally and try to login, remove the old mouse drivers, shutdown, connect the mouse and the system will detect it and install a default driver for it...

If you face no luck then try to use a serial mouse instead of a PS/2 mouse and check what happens...

hope this helps you out...

-Rafik

by chipmunk

Thanks Rafik, I have the problem solved but it was related to someone changed the password.

by khwa

Start with the obvious, check to see that everything is plugged in well and in the correct port. You may want to delete the profiles that currently exists..I've had this same problem before and it worked for me....good luck!

by arwjnplanotx

Make sure you are still connected to the network. If your profiles are kept on the server and your disconnected from it then only the local administrator will be able to login.

by chipmunk

Thanks alsjunk, I have the problem solved but it was related to someone changed the password.

by rhys.gottwald

I know this may sound simpel, and I am sure that you have checked this but are you logging in to the Domain or the PC name. What is the error you are getting?

by chipmunk

Thanks rhys, I have the problem solved but it was related to someone changed the password.

by tjr

Is this a network config or stand-alone install of Windows NT? If your are networked, log into the PDC and reset the user's password in User Manager to assure that the password is not the issue with login. Make sure the account is not expired or disabled for any reason.

Once your solve the login issue then explore the mouse problem. Sounds like a bad mouse you may want to try a new mouse - they do wear out after a while.

by chipmunk

Thanks tjr, I have the problem solved but it was related to someone changed the password.

by Former member

VERY vague. 2000 points? really? Nah...

Well, assumptions must be made. A simple error message as to why you couldn't log in would be nice.

Wrong domain/local machine name in the Domain login dialog box?

That's about all I can say since yougave of no indications of any errors. WHy can't you login? Enter key doesn't work? 'Password incorrect' error? Login screen not responding to keystrokes? Monitor broken? What is it?

This discussion is closed to new replies.