Discussion Locked

Can't login to 5.1 server

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We recently installed a 5.1 server. After installing it had run for a few days with no problem. Last Monday the server hung. Had to power off and on because it was locked tight. Since then we have not been able to log into the server even with Adminusing client 3.01 sp1 on a Win95 box. Using NT or a later version of client works. I know this sounds like an easy fix(upgrade the client) but we would like to know why ut did this in the first place as this server is not in production yet and we wouldn't like this to happen after loading all the users and etc. any ideas?
Thanks,
Gary Wilson

3 replies

by acurrin

I would look to hardware or drivers for the lockup. 5.1 has been pretty stable for us on about 20 systems.

Check to see if your networking configuration was damaged. It could be that the NT client PC is using different protocols and the server is no longer properly bound to IPX or TCP/IP.

Check the connection information for the successful login and see what the network address is. That will tell you how the workstation is connecting to the server.

This discussion is closed to new replies.