Question Locked

can't ping any computer on wireless lan

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Before anyone responds to this it is absolutely not a firewall issue. All XP firewalls have been completely disabled thru services.msc and I use no other firewall protection, have even disabled router firewall. Router is Belkin\My Essentials. Internet works flawlessly on both desktops and laptop. IP's are as follows

Gateway 192.168.2.1
DT1 192.168.2.2
DT2 192.168.2.5
LT 192.168.2.4

Using WAP to protect LAN.

I am an MCP and I have done everything I know to resolve and combed internet for answers for 10 days. I spoke with Belkin to assure it was not the router and all settings are correct. I have flushed dns, set IP's to static(just to test now back on DHCP), each machine shows self and router in arp. All are on same workgroup. What am I missing?

26 replies

by john tharp

Are you trying to ping by IP address or Computer name?

by timba65

makes no difference and all pc's have different names

by timba65

ip ping times out, name ping comes back as unrecognized

by stealthwifi

The router can ping all but say 2.2 can not see 2.5 correct?

You restarted each PC after stopping and disabling XP firewall right.

Are all wifi cards same brand and with latest drivers, also check settings for drivers config to make sure theres nothing goofey in their.

Can PC's connect to each other even though they can't ping on another?

Cheers,

by timba65

No computer recognizews any other is even there. LT has built in wireless card, on pc has pci wireless card the other is using usb. I can ping out to internet and all can ping router. All drivers have been updated. No connection is the main issue as I am trying to run a game server on the lt.

by peconet tietokoneet

"All XP firewalls have been completely disabled thru services.msc and I use no other firewall protection, have even disabled router firewall."

Even though off, go into its settings and under the advanced tab, select your network and tick a few boxes referencing your requirements.

by timba65

I set firewalls to accept incoming echo before I disabled, also have exception set for service that I want to run and connect to. Thought that would solve issue and am totally baffled as to why I can't ping. Also ICMP is allowed on router. Good idea tho.

by normh3

I may have missed it in your explanation, but does all work if you use copper connections? Also, have you tried reflashing the bios on the router with a more update firmware revision?

by timba65

I attempted to hardwire all units through a switch but can't connect switch to router physically, hence the wireless network.. Wondering if I could bridge a second router and hardwire to it to resolve.

by older mycroft

So, when was ANY of these computers actually physically attached to the router then? At least one of them SHOULD be.

Have you run the WIRED and WIRELESS Network Wizards yet?

by timba65

At the risk of sounding stupid...I was unaware there was a "wireless" wizard. Looking for info on that now.

by thumbsup2

Forgive me if I chuckle, just a tad bit! :D

By the way, more than ONE problem has been solved by using a Wizard instead of manual configuration.

Give it a try!

by timba65

I didn't realize that was actually a wizard even though I have used it. It was the wording that got me. Yes I ran that wizard.

by timba65

I did not run it but I don't see how that will help as I did all of the steps in the wizard manually. All of the nodes are connected to the network and all can ping the router. The router uses a client list but I do not believe that it uses aNAT and I believe that is my problem as ping cannot translate name resolution. I went too cheap on the router. If I am way off here please shout out.

by older mycroft

Have ANY of these computers (or the switch, for that matter) ever been physically connected to the router as yet?

Without a physical cabled connection from at least one computer, how can you expect the router to be aware of any of the configuration protocols? What kind of router doesn't accept a wired connection?

by seanferd

Or the router is a powered brick.

How can you use WAP to protect a LAN? Is that a typo?

by timba65

The laptop was originally connected in order to configure the router, once configured the laptop was removed and now the only thing physically connected to the router is the modem.

by timba65

Wpa are you saying that one computer in the workgroup must remain hardwire connected to the router at all times?

by older mycroft

Initially you posted [i]"I attempted to hardwire all units through a switch but can't connect switch to router physically, hence the wireless network.. Wondering if I could bridge a second router and hardwire to it to resolve."[/i]

[b]Now you've said...[/b]

[i]The laptop was originally connected in order to configure the router, once configured the laptop was removed and now the only thing physically connected to the router is the modem.[/i]

[b]So my confusion is...
#1 If you once connected the laptop to the router, why could you NOT connect the switch to the router?

#2 When you DID run the Wizard, was the laptop the ONLY hardware connected to the router? To properly utilise the Wizard, ALL computers on the network MUST be powered up and connected to the network, but if you couldn't connect the switch to the router, this can't have happened.[/b]

Clearly the Wizard hasn't been allowed to do its job, so whenever you ran it - it was a waste of time.

< Edited due to the Emoticons needing a Wizard of their own!! >

by seanferd

Mycroft had the idea that you never had anything wire-connected, which is needed for initial setup of a router.

by seanferd

Or an intended network map.

Anything that changed between the "primary computer" and the router since setup will affect everything. (Switch, no switch.)

And the switch can't be connected to the router with Cat5, even temporarily?

If the router can handle all the connections, you probably don't need a switch, though. (Assuming everything can connect to the router cabled or wirelessly.)

by howard

Just a few thoughts..... Can you ping the desktops when the laptop is connected via cable to the router?Have there been any changes to routing on the router? What is the Subnet mask that DHCP is configuing? Are there any VLANS set up? Initial thougts are either a.) computers are trying to route to the internet for Local addresses or they are set up individually as VLANS which can't talk to each other..

by wayne

For the better.

Your mileage may *vary, but I've noticed more compliant performance in the way tcp/ip works, (relative to the specifications published on MSDN) after installing SP3.

I exercised all ports via TTCP and measured performance. I also noticed an implicit quibble in the specification - On an XP notebook on this network, behavior changes depending on whether the box is actively multihomed. I pinged the router successfully
on the wifi address , but had to back out the ethernet cable for ten seconds to do it.

* The only environment I see these days == XP SP3 / 2003 tools and libraries .net 3.5

by churdoo

You said you're using WAP, but then clarified WPA security.

That My Essentials router let's you specify a WPA PSK that allows full access, but also a "GUEST" WPA key. It is possible you're using the guest WPA key? The guest key allows only internet access, i.e. isolates each wireless device from other wireless clients, and this is the symptom you're having.

This discussion is closed to new replies.