Discussion Locked

Can't run 16-bit Windows Program

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

On one of our IBM Thinkpads a user get's the following erromessage This application is not supported by Microsoft Windows NT. The window title is: Can't run 16-bit Windows Program. When he logs on to another TP600 with the same installation he can run the program (Ccplus) without problems. I also used other userid's and only on this one PC the error occurs. I completely reinstalled the pc but the problem comes back. I checked on BIOS versions and did a memory test but found nothing wrong. So what might be wrong, is it a hardware problem?

SP5 is installed on all PC's

5 replies

by ssa

I already got the same problem. Check your DLLs in \system32 and \system directories - they must be the same. In case you find a newer DLL - replace it with an original from NT installation disk or SP. In my case it was ver.dll, but you may catch another.
Good luck.

This discussion is closed to new replies.