Question Locked

Can't see diffrent subnet Workgroup PC in network neighbourhood

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi i hope someone out there can help me to solve my problem last week my company has implement a vlan and ip subnetting for user and server side,for server vlan using IP 192.168.2.++/24 and user 172.16.1.++/22,then came the problem all user are using DHCP for IP and server are point to the DHCP server and using static IP,when open network places to see all the connected pc user only can see on their same subnet only same goes for the server,is there any chances of my WINS or netbios services problem i already check my DC and nothing problem user can ping and remote to the server just can't see the server in network places,if anybody has a suggestion or way to solve the problem any opinion or suggestion to solve the problem will be helpful.

5 replies

by cg it

Which one are you using or are you using both? If VLAN or both, how are you implementing inter-VLan communications?

IF the DHCP server is on one of the subnets, you need a DHCP relay agent so other comps on the other subnet can contact it.

If you are implementing VLans on a single switch, you subnet whatever Class and range your using. Switch IP is 192.168.X.X then Vlan1 [default] is 192.168.X.X Vlan2 would be a subnet of 192.168.X.X.

Could use VLSM.

by azwanarif

I'm implementing Inter-Vlan on single switch
default management switch IP is 192.168.0.253/24, server 192.168.2.253/24 Vlan2, User 172.16.0.253/22 Vlan3 using 3Com 4060 switch, Primary DC 192.168.2.25/24 Secondary DC/DHCP/WINS 192.168.2.18 user are point to secondary DC 192.168.2.18/24 forgot to mention that users are Workgroup and does not have domain

by cg it

"router on a stick" for intervlan communications on a single switch.

if you have 2 switches you need to trunk and have VTP server/VTP client running.

by azwanarif

Hi thanks for the suggestion,with this message i include below 3Com 4060 Core Switch Configuration hope that you can consult me for the configuration if there any mis configure or wrong configuration for interVlan connection

bri vlan          sum
Select IP interface (1-4,all)[all]: a

The IP address for interface 1 has been configured Manually.

Index Type IP address Subnet mask State VLAN ID
---------------------------------------------------------------------------
1 Primary 192.168.0.253 255.255.255.0 Up 1
2 SLIP 0.0.0.0 0.0.0.0 Down n/a
3 Primary 192.168.2.253 255.255.255.0 Up 2
4 Primary 172.16.0.253 255.255.252.0 Up 3

Select menu option (protocol/ip/interface):

Menu options: ---------------------3Com Switch 4060---------------------
add - Add a new IP interface
modify - Modify IP interface information (interface 1 or 2 only)
remove - Remove an existing IP interface
summary - Display summary information

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (protocol/ip/interface): q

Menu options: ---------------------3Com Switch 4060---------------------
arp - Administer ARP
basicConfig - Basic IP management configuration
initializeConfig - Reset IP information to factory defaults
interface - Administer IP interface
ping - Poll remote device
rip - Administer RIP features
route - Administer IP routes
traceRoute - Trace the route of IP packets
udpHelper - Administer the UDP broadcast helper

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (protocol/ip): route

Menu options: ---------------------3Com Switch 4060---------------------
add - Add a static route to the routing table
default - Define the default route
find - Find an existing route in the routing table
flush - Remove all learned routes
noDefault - Remove the default route
remove - Remove an existing route
summary - Display summary information

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (protocol/ip/route): si um

Destination Subnet Mask Metric Gateway Status
------------------------------------------------------------------------------
Default Route -- -- 192.168.2.1 static
172.16.0.0 255.255.252.0 -- -- local
192.168.0.0 255.255.255.0 -- -- local
192.168.2.0 255.255.255.0 -- -- local

Select menu option (protocol/ip/route): q

Menu options: ---------------------3Com Switch 4060---------------------
arp - Administer ARP
basicConfig - Basic IP management configuration
initializeConfig - Reset IP information to factory defaults
interface - Administer IP interface
ping - Poll remote device
rip - Administer RIP features
route - Administer IP routes
traceRoute - Trace the route of IP packets
udpHelper - Administer the UDP broadcast helper

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (protocol/ip): 

Menu options: ---------------------3Com Switch 4060---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management

Type ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option: bri vlan det
Select VLAN ID (1-3,all)[all] : a

VLAN ID: 1 Name: Default VLAN stpIgnoreMode: Disabled

Unit Untagged Member Ports Tagged Member Ports
------------------------------------------------------------------------
1 6,9-13,15-16,19-24 none
Aggregated Links AL1-AL13 none

Unicast Frames: 274 Octets: 6716038
Multicast Frames: 101470 Broadcast Frames: 4

VLAN ID: 2 Name: vlanIntranet stpIgnoreMode: Disabled

Unit Untagged Member Ports Tagged Member Ports
------------------------------------------------------------------------
1 5,17-18 11,13,15-16
Aggregated Links none AL1-AL4

Unicast Frames: 38209979 Octets: 58673935
Multicast Frames: 12557 Broadcast Frames: 391101
Enter for more or 'q' to quit--:

VLAN ID: 3 Name: UserAccess stpIgnoreMode: Disabled

Unit Untagged Member Ports Tagged Member Ports
------------------------------------------------------------------------
1 none none
Aggregated Links none AL4

Unicast Frames: 35679 Octets: 8424930
Multicast Frames: 337 Broadcast Frames: 3153

Select menu option:

Menu options: ---------------------3Com Switch 4060---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management

Type ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option: phys

Menu options: ---------------------3Com Switch 4060---------------------
ethernet - Administer Ethernet ports

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (physicalInterface): ether

Menu options: ---------------------3Com Switch 4060---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
smartAutosense - Enable/disable smart autosensing
summary - Display summary information

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (physicalInterface/ethernet): sum
Select Ethernet ports (unit:port...,all,?): a
Refresh Time:10 Seconds

Port State Mode Rx Packets Rx Octets Errors
-------------------------------------------------------------------------------
 1:1 enabled 1000full (Auto) 85525 12594014 0
1:2 enabled 1000full (Auto) 581969 80487347 0
1:3 enabled 1000full (Auto) 789890 140395101 0
1:4 enabled 1000full (Auto) 421647 63572987 0
1:5 enabled 1000full (Auto) 49583 7326322 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 1683634 274155584 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 5466856 637708347 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 1098501 112055441 0
1:14 enabled 1000full (Auto) 1011629 410908758 0
1:15 enabled 1000full (Auto) 10173535 2756639068 0
1:16 enabled 1000full (Auto) 2151269 1176170635 0
1:17 enabled 100full (Auto) 14758600 2844472332 0
1:18 enabled Link Down (Auto) 47 4323 0
Quit  Counters  Differences Next 1:1 enabled 1000full (Auto) 85525 12594014 0
1:2 enabled 1000full (Auto) 582003 80489659 0
1:3 enabled 1000full (Auto) 789975 140400913 0
1:4 enabled 1000full (Auto) 421652 63575503 0
1:5 enabled 1000full (Auto) 49584 7326386 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 1683652 274158376 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 5467126 637751613 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 1098589 112061863 0
1:14 enabled 1000full (Auto) 1011639 410910240 0
1:15 enabled 1000full (Auto) 10173696 2756763643 0
1:16 enabled 1000full (Auto) 2151286 1176172178 0
1:17 enabled 100full (Auto) 14759215 2845097812 0
1:18 enabled Link Down (Auto) 47 4323 0
Quit  Counters  Differences Next Timestamp:10145 Seconds1:1 enabled 1000full (Auto) 0 0 0
1:2 enabled 1000full (Auto) 0 0 0
1:3 enabled 1000full (Auto) 22 1498 0
1:4 enabled 1000full (Auto) 1 68 0
1:5 enabled 1000full (Auto) 0 0 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 11 2299 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 81 10801 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 27 1897 0
1:14 enabled 1000full (Auto) 0 0 0
1:15 enabled 1000full (Auto) 66 44287 0
1:16 enabled 1000full (Auto) 12 1632 0
1:17 enabled 100full (Auto) 212 194593 0
1:18 enabled Link Down (Auto) 0 0 0
Quit Counters  Differences  Next 1:1 enabled 1000full (Auto) 85525 12594014 0
1:2 enabled 1000full (Auto) 582041 80492243 0
1:3 enabled 1000full (Auto) 790114 140410371 0
1:4 enabled 1000full (Auto) 421663 63578938 0
1:5 enabled 1000full (Auto) 49585 7326450 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 1683689 274165691 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 5467527 637810223 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 1098742 112073942 0
1:14 enabled 1000full (Auto) 1011640 410910501 0
1:15 enabled 1000full (Auto) 10174021 2757013552 0
1:16 enabled 1000full (Auto) 2151315 1176176602 0
1:17 enabled 100full (Auto) 14760381 2846154781 0
1:18 enabled Link Down (Auto) 47 4323 0
Quit  Counters  Differences Next Timestamp: 4 Seconds1:1 enabled 1000full (Auto) 0 0 0
1:2 enabled 1000full (Auto) 5 342 0
1:3 enabled 1000full (Auto) 3 2523 0
1:4 enabled 1000full (Auto) 4 274 0
1:5 enabled 1000full (Auto) 0 0 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 3 274 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 77 10445 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 42 4195 0
1:14 enabled 1000full (Auto) 1 100 0
1:15 enabled 1000full (Auto) 61 24072 0
1:16 enabled 1000full (Auto) 4 344 0
1:17 enabled 100full (Auto) 210 189369 0
1:18 enabled Link Down (Auto) 0 0 0
Quit Counters  Differences  Next 1:1 enabled 1000full (Auto) 85525 12594014 0
1:2 enabled 1000full (Auto) 582108 80496805 0
1:3 enabled 1000full (Auto) 790173 140417412 0
1:4 enabled 1000full (Auto) 421692 63584134 0
1:5 enabled 1000full (Auto) 49586 7326514 0
1:6 enabled Empty GBIC 0 0 0
1:7 enabled 1000full (Auto) 1683802 274182970 0
1:8 enabled 1000full (Auto) 0 0 0
1:9 enabled Link Down (Auto) 0 0 0
1:10 enabled Link Down (Auto) 0 0 0
1:11 enabled 1000full (Auto) 5467975 637874701 0
1:12 enabled Link Down (Auto) 0 0 0
1:13 enabled 1000full (Auto) 1098951 112092664 0
1:14 enabled 1000full (Auto) 1011679 410917959 0
1:15 enabled 1000full (Auto) 10174562 2757381049 0
1:16 enabled 1000full (Auto) 2151369 1176187626 0
1:17 enabled 100full (Auto) 14761443 2847116785 0
1:18 enabled Link Down (Auto) 47 4323 0
Quit  Counters  Differences Next

Select menu option (physicalInterface/ethernet):

Menu options: ---------------------3Com Switch 4060---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
smartAutosense - Enable/disable smart autosensing
summary - Display summary information

Type "quit" to return to the previous menu or ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option (physicalInterface/ethernet): det
Select Ethernet port (unit:port,?): 

Select menu option (physicalInterface/ethernet): 

Menu options: ---------------------3Com Switch 4060---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management

Type ? for help
-----------------------------------4060-Level1 (1)----------------------
Select menu option: log

exiting session....

This discussion is closed to new replies.