Discussion Locked

can't snd e-mail w/ 1mb

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We're using an exchange server with dial-up c0onnection to the internet.In the Internet Mail Service I configured the message transfer quota to "no limit". How come we can't send e-mail with more the 1mb attachment. What could be causing this problem. Please I need solutions to this ASAP.

7 replies

by radiic

Check the Properties of the Private Information Store and make sure that there is not a checkmark in the do not send if larger than blank k. If thats not the problem you might want to contact your ISP and make sure they dont have a limit on there e-mail relay for you.

by stillatit

You may be dealing with a time-out issue between your server and the receiving server, since 1mb will take several minutes on a dial-up line. Is the limit really exactly 1mb, or is it just somewhere in that neighborhood? If your outgoing message size is set to no limit, Exchange allows up to 16mb.

Also, remember that while you may have no limit set, your receiver may.

Note that attachments are typically converted to a sendable format, and that when this happens, the actual transmit size may grow up to 50%.

Good luck.

by tlippert

If your actual mail server is on an ISP then it could be limited on the ISP's mail server. This could be on your ISP's end or the receivers end. Check with your ISP.

This discussion is closed to new replies.