Discussion Locked

cant sync but connection ok

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
when I press hotsync button, a msg come with "connecting with handheld", no username displayed. However, no syn occur and the msg disappear after 1-2mins. btw, I can syn my palm with same cable in my office PC.

9 replies

by steve.fall

Maybe something is polling that com port. Do you use ActiveSync also on that machine. If so ensure that trhe process wcsscomm is closed.

Try changing the port that you plug the device into also.

by strakovsky

Is your PC COM-port enabled in CMOS and properly working? The easiest way to check - plug in there a mouse. ;-) Have you setup the port speed on both sides? By default in Windows it is 9600bps. Your PC must have equal or higher baud-rate than your palm (e.g. 115200bps). BTW, the handheld overclocking may also harm the connection. Be sure before sync to disable all of the hacks installed.

by sir keg

check your setup I'll bet you have not check off the empty box beside your name.
then go over all your settings (if your useing outlook, Notes, Groupwise or just basic palm apps the are diffent if you tell us witch we could be of more help.
becouse you are getting the Palm to talk to the computer your connection is good.

This discussion is closed to new replies.