Discussion Locked

Cat 5 life expectancy

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are moving into a new building. Although we are making extensive changes to the existing layout it was suggested to re-use the existing Cat5 cabling rather than replacing it with new Cat5e. The cabling needs to accomodate voice and data traffic.
Aside from usage, how does the cable age affect this decision?
The existing cable was likely installed in 94/95.

7 replies

by ann777

Cable age itself should not be a factor.

I'd suggest that you look at the cable. If you see any sign of kinks, knots or eating (as in mouse bite marks, or vacuum cleaner consuming), that you at least replace those sections.

by tjc

And if you decide to replace the CAT 5 then you may want to think of putting in an optical backbone for growth since who knows what the cabeling and usage specs they had for the existing stuff.

by mckaytech

There are basically two ways in which cable degrades. The first is degradation of the jacket and/or insulation and the rate at which that happens depends on environmental exposure and whether the jacket is pvc(standard) or teflon (plenum-rated). Plenum cable that is only 6 years old should be in pretty good shape (barring gnawing rodents and that sort of thing...). PVC may or may not be and you should look for cracking, distortion, etc.

The second degradation is oxidation of the connections and at six years that could be a significant factor, depending on how competently the original cable was terminated. If you take apart a termination and you have to scrape and scrape and scrape to get down to shiny copper wire, there has already been significant oxidation and that would suggest replacement.

In similar situations, I have retained one of my colleagues who does cabling professionally to evaluate and test the existing cable at the speeds at which you expect to operate. If ittests good and was properly installed in the first place (observation of bend radius, properly secured against motion, proper distance from power circuits, etc.), I leave it in place.
Otherwise I replace it; any doubts are also resolved in favor of replacement.

paul

This discussion is closed to new replies.