Discussion Locked

cd-rom

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi,
i have both a cd-rom and a cd-rw connect to my computer but my computer can not detect iether one of them. I tried changing the cables because i thought it might be the wires but its not. can somebody help me?

3 replies

by power natto

Check the jumper settings on the devices. If both are connected to one cable, one needs to be "master" and the other "slave". If your computer supports it, the jumpers can also be set to "cable select" so master and slave is automatically detected.

In the computer configuration (BIOS) make sure it is set to auto detect new drives.

by fastfootfreddie

I agree with Power, but, I would also add one cd at a time and see if it will detect it. If not it is possible your CD or secondary IDE is bad.

by bwells47

The cd-rw has to be the master. One end of the cable has to be on it, and the other end on the mother board. Set the bios to auto detect, and get the burner going first. Then hook the cd-rom to the middle part of the strap as slave. It should work.

This discussion is closed to new replies.