Discussion Locked

CdRom can read install disk but no other

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was given an old working puter trying to get it going for kids homework to get them off mine.
Is a Compaq presario 2200 running win95.
Am going thru each component to learn, test & understand. Will try and upgrade a bit, If can get more parts.
Present prob-Cdrom wpi cdd- 820 eri, Atapi IDE V1.228A.
It can read from the restore disk that came with puter, (I formatted and reinstalled to get rid of others files). I tried music CD no go, other CDS that came with puter, no go, even tried CDr disk, no go. It just says CD drive not ready , retry? I retry keeps saying same thing. Over and Over. Drive shows as working in Device manager and no conflicts. Any way it seems to work with restore cd.
I suspect puter may have been for work purposes or old work one, could it be locked to stop ppl loading stuff?
By the way there was no Ram in slots, had to put some in but now only got 30MB. Also needing software for assessing componants and testing but has to be tiny to fit on floppy, got WinAudit but want more info.
Thanks in Advance for any and all help. :)

15 replies

by raticus

Please accept slow responces from replys you.ve put as this puter still shared by 5 ppl. So cant get on for this stuff often.

by raticus

Please accept slow responces from replys you.ve put as this puter still shared by 5 ppl. So cant get on for this stuff often.

by jaqui

try loading bios defaults to begin with, it may be locking the cdrom.

then make sure it has a plug 'n play os selected.

try updating windows version, but definately after getting more ram. 32 megs is not a very usefull amount any more.

by willcomp

It's obvious that the BIOS recognizes your CD ROM drive and it is operable since restore CD works.

Win 95 often has problems with CD ROM drives and I suspect you have an OS/driver issue. In many cases, it is necessary to install DOS mode drivers to allow drive to operate properly with Win95. Yes, even for ATAPI drives (before someone asks).

Your best solution would be to install Win98 or Win 98SE. They will run with 16MB RAM and require about 200MB HDD space for installation. Both are much superior to Win95 in driver and hardware support. Both also install from bootable CDs.

Dalton

by curacao_dejavu

since it is a old cd rom it will only read certain type's of cd's.
I don't remember the color code for all cd's (blue , etc) but that's the main problem here.

it will read only certain cd's and if cd-r only burned at 2 or 4 speed.

Leopold

by dmiles

Go to the Microsoft Knowledgebase web site and download the latest version ATAPI update,also check for a Win98 boot disk and run without cd rom support load the files for MSCDEX that is part of win 98 boot disk

by squirrelgirl

I have an old Compaq similar to yours and had the same problem. Also had a client's Compaq of the same vintage with similar issues. First thing is to definately get rid of Win95 , upgrade to 98SE. Either way (Win95 or 98), you need to go to Compaq's website and download any CD drivers relevant to your machine and OS. Here's a link to get you started :(http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=Presario+2200&submit.x=8&submit.y=5)
Also search for their "SofPaq" for your specific model and S/N. "SofPaq"'s upgrade and patch your Compaq's BIOS.You download the program and run it from a floppy at bootup.

by raticus

Very Sorry for delayed Response, will be further delayed, so will close question for now.
My daughter died 29Th Jan 05, and am not doing any computer work at present.

This discussion is closed to new replies.