Discussion Locked

Changing Domain of a BDC

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I presently have an NT Server 4.0 as a BDC. I would like this server to be a BDC in another domain where the PDC is a 2000/Server. Can I change domains with out re-building the NT 4.0 BDC and can I have a PDC as a 2000/Server and the BDC as a NT/Server 4.0.

6 replies

by timwalsh

You cannot simply take a BDC from one domain and plug it into a different domain and have it act as a BDC for the new domain. You do essentially have to rebuild the NT BDC. You can use the ROLLBACK.EXE utility from the NT 4.0 Server CD. This willerase all registry configurations and take you back to the end of the text mode portion of NT Setup. This will save you a liitle time.

by timwalsh

You will still have to go back through the installation of drivers, etc. and the re-installation of any other applications that were installed.
You can have a NT 4.0 BDC in a Win2K domain as long as the domain is still in mixed mode.

by joseph moore

Please read this page on moving a BDC to a different domain:
http://is-it-true.org/nt/atips/atips51.shtml
The official line from Microsoft is that this can't be done. The SID for the BDC is built from within the domain it is a BDC for. IF you could move the BDC to a different domain, its SID would be completely incompatible.
The page does lists two 3rd party tools that claim to be able to do this by making extensive Registry changes.
I have never done this, and I am not sure of the result.

Now, with a Win2K as a Domain Controller for your other domain, I have a question: when you set up the 2K server (running DCPROMO to make it a DC) did you specify that only 2000 clients would connect, or did you select that legacy clients wouldbe on the domain? 'Cause if you said 2000 clients only, then I think adding a NT4 box to the domain will be very difficult.
Please read this Technet article on this also:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q293127
(please remove any spaces)

Good luck.

This discussion is closed to new replies.