Networks

Ask something
Discussion Locked

changing ip address in Netware 3.12

0 helpful
7 replies

by gel 2 views

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
i just want to ask how to change the ip address of Netware 3.12 on the system console or on the client side.
existing ip address is 192.168.10.5 and i want to change it to 192.168.10.7.

Thanks in advance.

7 replies

by rbgnr111

on the sys volume in the system directory
there should be a file called autoexec.ncf
in that file there should be a binding for
tcpip the the old address, edit that ip.

by rogerndgreen

If you cannot find the line in the autoexec.ncf file (e.g. load tcpip addr=192.168.10.5), then try running LOAD INETCFG.
This will be able to walk you through changing the IP address.
You will need to unload and reload the TCPIP.NLM file before the changes take place, the easiest thing to do is reboot the server.
Hope this helps

Rog

by socia256

Try running FCONSOLE, then on the "Available Options" menu select "LAN Driver Informaiton".

When the next window opens "LAN Configuration", in that box you should see Network Address, LAN Board Type, Node Address, Configuration, Hardware Options.

I do believe you would select the Network Address option.

Man I have not played with 3.12 since 94 or 95.

My brain hurts, this is all that I can recall at 3:51am, sorry.

L 8 R,

This discussion is closed to new replies.