Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
One of my AS/400 users recently got a new PC, so we installed Client Access on it so she can access the AS/400. When she prints now, her font is unusually small, as if the software is condensing it to print 132 columns on narrow 80-calumn paper - -but it prints sideways, in landscape mode. I have tried several times to change fonts, sizes, and printer types, but always get the same results, "Courier 10", though it is reduced in size to print on only the first 80 columns of the landscape modepaper. In configuring the printer session I have tried various printers, but when the box for "Transform print data to ASCII for AS/400" is checked, I always get reduced Courier 10, printing in landscape mode. If I uncheck the box, I get full-sizeCourier 10, but the font is jammed together into 80 columns, still printing sideways on the paper, in landscape mode.
7 replies
by john22
I assume that the printer is attached to the PC, the user problems are when printing from the AS/400, and the printer is a device on the AS/400. If so, go to properties on the printer session (should be on the first tab) and change to use the localinstead of the host settings. You should also be able (on another tab) to control the CPI and LPI settings to futher define how the output looks.
by greynold
Reply to the answer from John22:
No, it is not a locally-attached printe,it is a network printer. The printer is an HP LaserJet 5000, and the printer driver is the correct one. Printing from any other application is just fine.
by greynold
Reply to the answer from John22:
No, it is not a locally-attached printe,it is a network printer. The printer is an HP LaserJet 5000, and the printer driver is the correct one. Printing from any other application is just fine.
by greynold
The question was auto-closed by TechRepublic
by malexand
Are you talking about Print Screens? or general printing of reports from her to the printer? (with everyone else not having a problem)
by greynold
The question was auto-closed by TechRepublic
by greynold
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies