Networks

Ask something
Question Locked

Cisco 2600 Port Forwarding

0 helpful
2 replies

by dr.engnr 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Cisco 2600 is connected to WAN

e0/1 is 192.168.1.1 -> Linksys w/ DDwrt 2.4
e1/0 is dhcp from wan

Been trying to port forward FTP(21) and RDP(3389) to 192.168.1.121 which is connected to the linksys.

ip nat inside source static tcp 192.168.1.121 3389 interface Ethernet1/0 3389

The above is not allowing a connection. I have also tried to forward incoming requests to the linksys and have it do the port forwarding but not working either.

Any help would be appreciated.

Thanks.

2 replies

by bfilmfan

Command looks right. Do you have an access list configured?

This discussion is closed to new replies.