Discussion Locked

Cisco 3508 compatibility & 3Com Switches

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are looking at upgrading our existing backbone to Gigabit speed. Through research we are going to use a Cisco 3508G-XL Multi Mode Fiber switch to our DEC Alpha servers. We are also looking to intergrate with a 3Com 3900 36pt with a SX add on module. Question is: Are there going to be any issues that we should be concerned with as far as intergration between the two. If the Model of the 3Com switch doesn't work, is there another 3Com model that can be recommended?

9 replies

by tbradley

There is no real incompatibility issue, except that of managment.

With the money you are going to invest, I would recommend going with all cisco equipment, just to save in terms of management software and tech support.
Cisco tech support is excellent in supporting
"attached" cisco equipment without a tech support contract. Cisco "smartnet" maintenance is worth its weight in gold, and I've called at 7pm EST and received a replacement module or unit by 9am the next morning.

3com, while they make some good equipment, is not giving a lot of people warm fuzzies in regards to their future. Too many product lines are being discontinued, and in my case, I have some very expensive switches which used to have lifetime warranties that will expire in less than 24 months. Their tech
support is also rapidly declining in quality.

by estebandelatorre

There should not be any incompatibility isses, due to the fact that SX is a standart.
Where you can find some rare things are in management tools and software and if you want to define Vlans across the 2 devices

Good luck

by expertpc

There should not be any compatability issues but for the money the better solution would be all Cisco instead of mixing brands.

This discussion is closed to new replies.