Question Locked

Cisco 851W wireless problem

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I get recurring wireless dropouts when using the cisco 851w. It is located 6 feet from the client machine I'm testing with.

The client machine has performed flawlessly on network with an 871w installed, and a cheap D-LINK I tested with. Therefore the problem assuredely seems to be the router.

- I've attempted switching channels
- no cdp enable
- no dot11Radio extension aironet

these configurations do not improve the experienced behavior. I heard something of a "faulty chipset" from a Cisco integrator I once spoke with, but I've never experienced hardware problems with Cisco before.

Has anyone experienced this?
Has anyone who has experienced this, fixed this?

Thanks for any information that can be provided.

6 replies

by hal 9000

Located here

http://tinyurl.com/ydnz4l

And you still have no joy I would be looking at a possible faulty unit and contacting Cisco for a replacement unit to fix your current problem.

But as always with any WiFi setup you do need to make sure that there are no other Wireless appliances interfering with the signal things like cordless phones Remote Controls or maybe even a Wireless Keyboard/Mouse could be responsible for this happening though if you have used different WiFi devices without a problem it would tend to point to a defective Unit in the first place.

Personally I use a WiFi Seeker like the one here just to make sure that the unit is still transmitting as they are far more reliable than relying on a supposedly generated signal on any computer.

http://tinyurl.com/35tnn

There could be a software issue causing the scale to read wrong. These are cheap easily transportable and easy to use and you can immediately rule out a problem transceiver with one instead of spending a vast amount of time trying to fix something that isn't broken in the first place.

And no sorry but I don't have any personal experience with this particular model.

Col

by ccie10869

There is a issue which causes variable S/N ratio with IOS 12.4T and 12.4XJ. 12.4(15)XY2 appears to be a stable release.

by Former member

Like say 2 /3 or 4 minutes? If so have a look at your computer in the network connections, right click on your "local area network" (or something similar) icon then "properties > configure > power management" and see if there are any ticks in any of the boxes, if so then un-tick the boxes and then exit from the pages. You might need to restart your computer.

Please post back if you have any more problems or questions.

by josephdrane

I received a "hand me down" Cisco 851w from a company who stopped using this router because it was not working as it should. I set it up at home and noticed that it was running 12.3 something. When using the network cable everything worked as it should however the wireless just sucked. So a quick search on google and I find this post and then download the latest 12.4 code and voila! The router works great! Thanks to all for this post and tech republic for keeping older posts!

This discussion is closed to new replies.