Question Locked

Cisco 861 router multiple VLANs/DHCP pools

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My goal here is to have one DHCP pool serve clients on one VLAN, another DHCP pool serve all other clients. I have my DHCP pools set up and a VLAN 796 configured ONLY for interface f2 (switchport access vlan 796), the default gateway IP for my VLAN-serving DHCP pool 172.19.2.254 assigned to interface VLAN 796, the default router for my DHCP pool is also 172.19.2.254 and I have the ip dhcp-server 172.19.2.254 command in place. I have f2 connected to a switch port on a VLAN with only one other port on it, with my laptop connected to this port. I see clients receiving my full 172.19.2.1-253 scope and in the "show arp" output these clients appear on interface vlan796. Given my configuration I don't see how this is possible. And on my laptop I receive IPs from the other DHCP pool (which is 172.30.0.0/16) rather than the 192.12.2.0/24 pool. I have since excluded some 172.19.2.0/24 addresses. Also I have a a permit any any access-group in place for interface vlan796. Any assistance would certainly be appreciated of course.

Thank you,

Steve

1 reply

This discussion is closed to new replies.