Question Locked

Cisco Aironet AP521 multiple SSID configuration

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here I am trying to connect the internet with Cisco AP. Each on different SSIDs ( ssid1 and ssid2 ) at the same time on the same Cisco AP but
I can connect only with "ssid1" whose corresponding VLAN is checked as "native VLAN" ( only one VLAN can be set as "native VLAN" at a time) .
When tried with "ssid2" , the PC was failed to connect via internet and can not get the IP address which is provided by the DHCP server. The reason behind this I think is that VLAN corresponding to "ssid2" is not "native VLAN", because when I replace the native VLAN (which is VLAN corresponding to "ssid1") by VLAN corresponding to "ssid2" . The PC can online with "ssid2", but at the same time others PC will not be able to online with "ssid1"

please help~~~ thank you very much.

5 replies

by rjluvkc

SSID 1 works because your DHCP server is already on that subnet...you need to route DHCP through your router to the other VLAN. What router are you using? Is it the DHCP server? The second vlan ip config needs to be different than your native vlan.

by yih_khang

Anywhere, I not using router. I'm using the WatchGuard Firewall to route the traffic. Is it possible the second VLAN IP same IP subnet with the native VLAN?

by rjluvkc

I believe you will have to configure another dhcp scope and assign it to your second vlan that isnt working.

This discussion is closed to new replies.