7 replies
by brendan.smyth Accepted solution
by lodizzie Accepted solution
Please tell me you change the security for your vpn tunnels that you posted? Also you want to lock down https access to your firewall.
http 0.0.0.0 0.0.0.0 outside
http yourip subnet outside
did you ever get this resolved?
by dan.green Accepted solution
by cg it Accepted solution
1 of which constitues your DMZ...
have to remember that a DMZ zone is an area between your perimeter firewall and your firewall that protects the company network or is an area that is not protected by any firewalls [exposed directly to the internet] but is behind a perimeter router and in front of the company firewall.
If your ASA 5500 is your perimeter router and your internet connection connects to it via WAN port, then your 3 VLANs you configured as subinterfaces on the LAN interface of the ASA 5500 are really all subnets of the ASA 5500 and are not segmented into seperate networks using a router and firewall. So depending on one's definition of a DMZ your DMZ isn't really a DMZ zone. Your ASA 5500 should allow you to access any VLAN created as subinterfaces on the LAN interface for Intervlan routing. Even on a VPN connection that is established on the ASA 5500.
I would say, disabled your ACLs and see if it works. If it does, the problem is in the ACLs. [Access control lists are where most access problems occur]. If hosts on one VLAN can access resources on any other VLAN, than intervlan routing is functioning properly. Therefore a remote VPN connection to the ASA 5500 providing the remote client with a local network address via DHCP relay agent would allow the VPN client access to any VLAN through intervlan routing.
by perlmonkee Accepted solution
by thamiso Accepted solution
by thamiso Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending