Discussion Locked

Cisco/Non-Cisco VLAN

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Cisco 7513 with IOS 12.2 I am using xyplez 2025 switches. I have assigned IP address 143.81.10.1 255.255.255.0 to f1/1/0, 143.81.171.1 255.255.255.0 to f1/1/0.171, and 143.81.161.1 255.255.255.0 to f1/1/0.161 with encap of dot1q 61 and 71. When using a laptop from the switches I cannot ping anything. I assign the laptop a 143.81.171.25 address with gateway of 143.81.171.1. On ping I get destination unreachable. ???

1 reply

by sidney

The first things I'd check would be:
1. Is the "encap isl" set at the interface level rather than the sub-interface level.
2. Are the 2025s tagging the VLANs on the ports connected to the 7513.
3. I'd also put the dot10 network on a sub-interfacefor consistency.

This discussion is closed to new replies.