Discussion Locked

Cisco Wireless - Forced Log-ons

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am going to install a Cisco 350 Wireless access point in a remote location. The remote location is a BDC running NT4.

How can I configure the access point and cards to require the wireless users to log-on to the network? My goal is to prevent unauthorized users from using the network.

3 replies

by mckaytech

You'll probably need to add the CiscoSecure software piece (v2.6 supports the 350 Wireless). This will require the clients to authenticate against your NT domain before they are granted access to your network - it works pretty much like ACS or Radius for dialup.

You would install the CiscoSecure on your NT4 server and then configure the 350 to require authentication and tell it where to find the ACS server. When a request comes in, it will check with the NT server before making the connection.

If you have a CCO login, you can download a 90-day trial of CiscoSecure from the Software Center on the Cisco Web site.

paul

This discussion is closed to new replies.