Discussion Locked

Client protocol configuration!

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi there,

We run 11 intranetware servers / 750 pc's
from within our wan. We are noticing that there is starting to be a slowness issue.
We have had the "Wiring guys in" no problem. I have a suspicion that it may be that we have to much broadcast triffic / NETBIOS names etc. Could this be right?
Each Pc has client 32 on it + Tcpip for the internet / e-mail. How do I go about trying to figure this out? I do not have a protocol analyzer. Can I do this without a
protocol analyzer?

Thanks for the help

Jamie

9 replies

by acurrin

Without an analyzer, take a look at the structure of the network. Are you using switches/routers, are there any points on the network that are not slow?

If you are talking WAN links only, try shutting off SAP traffic at the routers to see if your problems go away.

In a way, your issue is a lot bigger than your question. A protocol analyzer is only one of the tools you need to work with.

You need to map out your network anyway before you determine where to put a protocol analyzer to get useful information.

Good Luck

by mr_cellophane

You only need IPX and TCP/IP remove any other protocols. Move IPX to the top of the protcols in the client setup. Install the latest client especially if you have NT w/s.

by sherrym

Could be a couple of different issues. Have you checked the following:
Rconsole into Intranetware servers, at console screen select resource utilization. Your cache buffers should be above 60%. If not add more ram to server. Check Internet usage. If usage is high or someone is downloading large files this could be the problem. What kind of WAN connection do you have? T1? 56K? It may be that you need more bandwidth and you need to upgrade your WAN lines.

by rdrake

Unfortunately there are a million and one possiblities as to the root of your troubles.
There are many things you can do without a protocol analyzer.

First off are you blocking napster at your firewall? Never know what users may be doing.

Asfar as reducing traffic a great way is to limit the frame type on the PC's to the one you are using instead of broadcasting all frame types. limit the SAP's being sent out from printers. disable Netbios and netbeui if you don't need them. Look intoserver configurations and client settings. Bad NIC's can slow down a network in a hurry. There are many things to try and no you don't need a protocol analyzer to do them. It may save alot of time by pointing you in the right direction however.

This discussion is closed to new replies.