Discussion Locked

Clients cannot access internet with ICS

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently set up a small network with two destop PC's and one laptop. One of the desktops has two NIC cards installed in it in order to run ICS through my cable modem. The network portion works fine, the ICS appears to be set up fine but the clients ( one desktop and one laptop) cannot access the internet. I receive no error messages when I launch either Netscape or IE, the desktop simply never connects. The desktop with the two NIC cards(the host) connects to the internet fine. Why am I unable to connect to the internet via the client machines?

5 replies

by rlucio

i would pressume that you are running windows 98/95 operating system. you have a hub that the 2nd nic on your ics host is terminated as well as the other 2 machines (the laptop and desktop). i also pressume that you have successfully installed your ics client. in your host machine you should have created a disk that's run to clients. this is the ics disk, taken from windows. if all is done correctly then you should have no problem. otherwise, follow this step:

1. make sure that all nic drivers are installed properly in all machines and tcp/ip are loaded.
2. from the host machine go to add/remove applications and go to windows setup tab and click internet tools and select internet connection sharing and follow all the steps and you should be fine.

if all things fail, buy yourself a cheap dsl/cable modem router with 4 ports (try dlink for $80). just setup your router as per instruction with your ip address from your cable provider which is in the work order.

have fun.

by gary_w

I also got frustrated with ICS quirks. So I bought an SMC Barricade 4-port router/firewall for $50 after rebate. both machines plug into the router, as does the cable connection. BAM! works like a charm. Both machines share the connection with nohassles. It also has a print server built in so my HP 693 is accessable from both machines.

This setup is WAY more stable and easier to maintain then using ICS.

Just my 2 cents.
Gary

This discussion is closed to new replies.