Coax network
i am doing an assignment on network desing one of my solution is with coax would i need a repeater if the distance between two of the buildings is 260m so it improves connectivity.
Thank you in advance.
Networks
i am doing an assignment on network desing one of my solution is with coax would i need a repeater if the distance between two of the buildings is 260m so it improves connectivity.
Thank you in advance.
by mike mullins
Maximum distance for 10base2 "thin coax" is 185 meters.
Maximum distance for 10base5 "thick coax" is 500 meters.
Good Luck
0bytes
by srbjakoska
by rjeffery
If it's only theory, it probably doesn't matter, but you should keep in mind that it's not recommended to join separate buildings with co-ax. This is because the electrical grounding on buildings can be less than perfect, and any variance in ground potential, or earthing faults in general, can cause large currents to be carried over the shielding of the co-ax between buildings. You should use fibre optic cable which would also eliminate any distance problem.
R.
by srbjakoska
by srbjakoska
This discussion is closed to new replies.
Sort by Trending