Discussion Locked

CodeCanvas

0 helpful
50 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
blog root

50 replies

by codecanvas

I am working on a web based generic mailer component that I am planning to reuse for all the projects. After completing it, I ran it through FxCop and in the many suggestions given by FxCop one was to mention a default FileIOPermission. I set the following in AssemblyInfo.cs

[assembly:FileIOPermission(SecurityAction.RequestOptional, Unrestricted=true)]

The project compiled without problem, but when I tried to access the page I kept getting the error message:

Parser Error Message: Could not load type 'VJ.RND.GenericMailer.Global'.

Source Error:

Line 1:  <%@ Application Codebehind="Global.asax.cs" Inherits="VJ.RND.GenericMailer.Global" %>

 

This error message was removed after removing the FileIOPermission setting from the AssemblyInfo.cs

I am trying to find the exact cause of the error.

This post originally appeared on an external website

by codecanvas

Ok, after inviting all friends personally now I have a lot of invitations on my account. Anybody in need of a gmail invitation leave a message as feedback with your email id (email id where the invitation has to be sent). Have a nice day.

Update on 23 Apr 2005:
Tip: When leaving your email do use the non-spam format like myname (at) mydomain.com in order to escape from email hunting bots.

This post originally appeared on an external website

by codecanvas

I have been trying to get hold of peer dotnet developers in Dubai for the last 6 months or so, but have managed only 3 of them till now. After hunting for a user group locally without much result, I have started a MS Tech interest group and would like to get more members to the same. I think geekwithblogs.net would be a good place to call for notification in order to increase the group size. Anyone in and around Dubai (or UAE for that matter) please do write to me at codecanvas (at) gmail.com so we can organise a get-together or group for DotNet users.

Hoping to get a lot of response :)

 

Regards,
CC

This post originally appeared on an external website

by codecanvas

 No matter how carefully you craft your programming code and regardless of your chosen language, every sophisticated application produced is bound to have bugs.

 In his book, Find the Bug: A Book of Incorrect Programs, Adam Barr shows you how to efficiently search your source code for bugs using a technique dubbed inspeculation. Chapter 2 of that book, Tips on Walking Through Code, is available from TechRepublic Downloads. In the following interview, Adam Barr discusses debugging and the role it plays in enterprise-wide application development.

[Transcript of the interview]

This post originally appeared on an external website

by codecanvas

For all of my post, there is a spammed feedback referring to a chinese website. I didnt even care to visit the site, the main reason I am posting this message is that I think we should have a bulk feedback delete mechanism within geekswithblogs.net admin so we dont have to confirm for each and every deletion entry. And secondly, I think GWB should implement the rel=”nofollow” for feedback links so it will become a discouraging move for spammers who spam for link counts.

Just my thoughts.

This post originally appeared on an external website

by codecanvas

If you’re a leader in an online group or website that helps others get more out of their PCs, and you’re passionate about consumer technology, then this is the place for you.

The Hive beta is your exclusive place on the Web to:

  • Connect with other community leaders in an exclusive environment.
  • Get insider news and information about Microsoft® Windows® products.
  • Share tips and cross-pollinate ideas to help improve your own community, and use The Hive to send your message out to the rest of the world.
  • Win* Sweet Stuff just for participating.

 

The Hive (http://www.inthehive.com)

This post originally appeared on an external website

by codecanvas

I was having a nagging feeling that I am not making use of the GMail's space that's allocated to me effectively. Thats when I came across GMail Drive which allows you to use your GMail space as a virtual online storage medium.

The creator had mentioned that the program breaks whenever GMail makes modifications, but the when I checked with latest version it was working fine.

Just to make sure, I had written to gmail support asking them if this particular software is allowed to be used along with their service, but all I got was a very generic reply from gmail as follows:


Hello,

Thank you for your message.

To learn more about all of Gmail's features, you can visit the Help Center at http://gmail.google.com/support/, or by clicking 'Help' at the top of any Gmail page within your account. The Help Center offers answers to frequently asked questions, and explains our product's features in detail.

If you'd like help with a technical issue, visit: http://gmail.google.com/support/bin/request.py?troubleshoot=1&ctx=troubleshoot to find solutions.

We hope you enjoy Google's approach to email.

Sincerely,

The Gmail Team


Well ? that didn't help really. I have had written them back stating that it didn't help me, for which they haven't replied yet.

 

So, if or not the software usage is allowed by GMail still remains a mystery. But what the heck, I am going to use it anyway.

This post originally appeared on an external website

by codecanvas

Gmail seems to not allow files of type extension .exe, .dll and so on which are executable. This is a reasonable step towards cribbing virus, but what about users who want to trade .net libraries? Well, initially I thought we can put in the needed files in a zipped format and then send them. That seemed to be a failed effort as gmail seems to scan inside the zip file contents. Next I tried to encrypt the zip file and then send it as an attachment, it also failed as gmail was able to enumerate the file names and then block the transfer. Finally, instead of compressing the content as zip, I did is as rar (winrar) and also encrypted the filenames in the rar file, only after doing that gmail allowed the transfer of file.

I personally think that currently users are quite aware of not to execute executable files that are sent over the email and it is kind of inconvenient to block the type of files that can be transferred.

This post originally appeared on an external website

by codecanvas

Got an announcement regarding a security breach that happened at spreadfirefox.com server, they are asking the users to change the password for their account on the server. Ok, changed my password. Now thinking about it I am wondering if this had been a Microsoft server this information would have got much more attention than it had got now.

Hopefully they are not running windows server for hosting the site to proclaim and put the blame on Microsoft.

This post originally appeared on an external website

by codecanvas

Recently I was trying to setup SubVersion on my server system, and wanted Apache based access from the clients to the source control. This will give me the option to control the access from a central place and also enable the source control to be access through web at a later stage.

So to enable both the application to listen on port 80, I created a sub domain in my DNS which points to a different IP from the one which IIS is currently listening. After making sure the 'Default Web Site' is not listening to 'All UnAssigned' IP addresses and setting DisableSocketPooling to TRUE, I tried starting the apache service. But Apache gave out a error stating that it could not bind to the mentioned IP (the second one).

After doing some googling, I came across a useful FAQ from Macromedia site which was explaining how to setup breeze server and IIS 6.0 on the same server. It also had a link to a Microsoft KB Article which explained the reason why IIS 6.0 is taking up all the present IP's on the server and how do we go about installing more than one application which listens on port 80 using different IP's.

It seems that just setting DisableSocketPooling to TRUE would not help in the case of IIS 6, so we need to make use of a utility called Httpcfg which comes in the Support tools directory of windows installation CD to make the IIS 6 to listen on specific IP's.

And also, after following the instruction to set the listening IP list for IIS 6, just restarting the IIS service is not sufficient; the HTTP service has to be restarted; which can be accomplished using the following commands:

net stop http /y

net start w3svc

Now all is fine and both IIS 6 and Apache are running along side happily :)

This post originally appeared on an external website

by codecanvas

I was working on flash file modification project recently and had to make use of drop down (ComboBox) control present in the flash 2004 UI Components. All was set well and when trying to execute the flash file, the component did not work or rather there was no component but just an empty rectangle in the place. After doing some tussling with the flash settings, I remembered that the flash file was created with an older version, and when I had opened it in flash 2004 pro, it had not set the action script verion to 2 (it was in version 1).

So after reseting the action script verion to 2 in the publish settings panel, the control showed up properly.

This post originally appeared on an external website

by codecanvas

Flash has an nice concept called 'Scene', using which you separate a full movie into various scenes logically and then work on them. This enables the developer from going insane over the countless layers and frames that they have to jump to. One problem I faced with scene jumping with the recent work is that, when you are gotoAndPlay'ing to a scene from the topmost scene it works pretty well, but the problem arises when you have to jump to a different scene from inside of some object placed somewhere else in the movie it simply doesnt work.

After doing some googling I found this FAQ section which explained about the concept of scenes and a way to overcome the drawback. To put a long story short, hen exporting your fla into swf flash just concatinates all scenes one after another into a full length movie. So after exporting there isnt anything called a 'scene' present in the swf and thats the reason objects at innermost level are not able to execute the gotoAndPlay or gotoAndStop functions for scene based jumping. To overcome this drawback we just have to place a label frame to where it has to jump (basically I name it same as the scene itself) and then call the gotoAndPlay("<labelName>") to move the player head.

In flash 2004 macromedia has introduced new concepts named Screens and Forms which dont have the above mentioned drawback, but as I was working on a older file I had to come across this issue.

This post originally appeared on an external website

by codecanvas

Seems GBs of free space is no longer a news, hriders.com provides 1 TB of free email space. hmmm, hopefully someone will make use of those space and will let us know if thats for sure a 1 TB.

As of now I have ample free space and too many email accounts to manage. So I am happy with Gmail itself. Incase anybody is making use of this, do let us know about your experience.

This post originally appeared on an external website

by codecanvas

We recently (two months back) bought a Samsung DVD-RW drive (TS-H552U), the drive worked properly with all CD-R and CD-RW models, but when trying to use it against moser baer products it just doesn’t recognize the disc.  Since we also had another DVD-RW on a laptop (Fijutsu) we were able to test the disc and it happened to work just fine.

 

After some one month of running to and fro from the Samsung after sales support centre, they have agreed that they aren’t able to resolve the problem and are willing to reimburse the original amount (We even tried with a new replacement drive).

 

Just thought of putting it so it maybe helpful to any new deciding party.

This post originally appeared on an external website

by codecanvas

Recently downloaded the latest release of Netscape navigator (8.0.3.3), I am quit surprised at the improvements and very practical approach they have taken towards making the new browser acceptable by all.

 

Firstly, there is not ‘yet-another-browser-engine’ concept for this browser; it natively supports both Internet Explorer and FireFox rendering engines. This basically means, if you are viewing a website which does not support Firefox or Internet explorer, choosing the alternate engine is just a click away.

 

Secondly, they have inbuilt webmail service support, which means you just create and keep your accounts of yahoo,  gmail, hotmail (sheez, why do people still send email to the old id’s) and with a click of a button you are straight in your webmail inbox! No not at the login screen with your user names and password filled, I mean straight inside your inbox so you just check your mails and close that tab! Now this is cool, it has been quite time consuming to make use of regular user name / login, click to inbox and then logout process which has to be carried out even with other browsers which has inbuilt support for storing login information. Only one hitch though, you cannot create more than one account for the same webmail service provider (public and personal emails), because if you store a second login information for the same webmail service provider it just overwrites the previous one.

 

Then there is the usual ‘Trust Settings’ which can be customized to each and every domain you visit. Then there are more customization options for tabbed browsing than FireFox, more customization option for FormFill.

 

I have using it for about a week, I am getting the kind of comfort feeling similarly to finding something that you expect.

This post originally appeared on an external website

by codecanvas

I was recently going through a nice list of Gmail Tips maintained by Jim Barr, it has a lot of useful tips out of which tip 25 tells you how you can create a label named "Unread" which automatically displays all the mails which are not yet read by you (not just in inbox or just in one label, but in your full email account). But when I tried creating such a label gmail didn't allow me, so I tried creating a label named "Unread2" and then tried renaming it to "Unread" that's when I got a message saying "System specific label names are not allowed. Please try another label".

Workaround for this problem at present would be to just type "label:Unread" in your gmail search box and hit enter. This will give you the complete list of emails which you have not read till now.

It would be a lot convenient if Gmail guys add such a link near the system folders / labels (I mean near Inbox, Sent Mail).

This post originally appeared on an external website

by codecanvas

I tried posting a comment on the respective post, but the page just seemed to refresh ignoring the comment (I made sure the Image Code was correct; including preserving the case). So I am giving my feedback as a post.

I would like to give a feedback on recent Tariq's post on Google Talk. Google has made a right move here. Instead of creating an altogether new IM protocol, they have considered and implemented an existing open platform server for the purpose and this only means even more extensibility.

In the FAQ page named "Google talk and open communication" they have presented an open invitation to other service providers to unite and bring a federation of communication services to the end user.

This just comes to show that they are not releasing a IM just for the sake of it, but to make the first step in unifying communication.

Just my 10 cents. Have a nice day.

This post originally appeared on an external website

by codecanvas

This is cool! Macromedia Flash 8 has introduced built-in support for downloading and uploading (with help of server side script) files with server. It is notable that the the player will be able to support uploading more than one file to the server, you can check out the worked out examples at Oniam Software Blog.

Advantage is that now displaying a progress of file upload will be easier. I am not sure if the post-back can be avoided with the help of asp.net 2, will have to check that out.

This post originally appeared on an external website

by codecanvas

It is really a exciting day for me! you see, it all started when I heard about yahoo offering domain registration for $1.99  (info from Sören 'chucker' Kuklau), I was very excited and opted to the yahoo page for registering my wanted domain name. After searching through the domain availability and getting over the fact that the .com version has already been taken, I choose .net tld and opted to book it for 5 years. This took me to Yahoo wallet, which asks for the CC details which I was more than happy to provide, but only if yahoo is ready to proceed further my day would have been more happier.

To clarify, there isn't any problem with the card (as I have purchased products online before and also yahoo does not complain about the card) but the only issue is that I really don't know what the issue is!

Well, let me explain in more detail now, once you reach the CC section and provide your information and press the "Continue" button all you get is a refreshed screen of the CC entry page! No errors, no information why I am still stuck there, but simply it does not proceed further. To make sure that I am able to get error message I wantedly emptied some mandatory fields and pressed continue for which there was a yellow colored error message box shown by yahoo, but when all are filled and ready it just simply doesn't proceed further.

After digging around for 10 min's, I found that the 'State' drop down list was showing US based states instead of India based states. Well, I tried

  • changing to a different country and then back to India
  • opened the wallet in different browsers (opera, IE, FF, Netscape)
  • cleared my cookies / temp internet files and such and did the above two points again

Finally I went to Yahoo India and searched for wallet service localized for that region, but couldn't find any and now wondering what other options I have.

I personally think small(?) hitches like this are the ones which makes the difference in experience between service which attracts users to use it and a service which forces a user to use it because he/she does not have any other option other than to compromise on comfortability for getting what he/she wants.

Finally, as of now I am planning to drop this non-ending madness to try to figure out a way and make use of godaddy. My only disadvantage would be that I could have booked the same domain for 5 years instead of less than that, if only yahoo had worked!

This post originally appeared on an external website

by codecanvas

After working on net for almost 5 years, I think the key to success of any browser is based on the usability features and improvements done for making them comfortable to users. After thinking over what I have liked in the browsers I have used so far, below is the top 10 key features I would prefer to have in a single browser. Most notably I think these would be a preferred feature for any internet browser user, do let me know your list through feedback

10. Developer tools {Developer’s developer’s developer’s…}
Preferred browser for the feature: Internet Explorer with Developer Toolbar / FireFox with WebDeveloper extension

A developer tool is one thing that's missing greatly from the browser guys. Yea sure there are lot of third party plug ins, but wouldn't it be great if it came directly form them who know the browser better? I appreciate the release of Developer Toolbar for internet explorer and Fiddler by Microsoft; it is a good direction to move on.

9. Look and Feel {Mood simple or not-simple ;)}
Preferred browser for the feature: Firefox

Common guys, we are not in the same mood always. We would need a light-weight skin which is tremendously responsive with least features during the time of work and development. But would need a skin which extends the browser functionality as and when we are in a 'experimenting/exploring' mood. Something like selecting a option like 'Keep it simple' or 'Make it cool' ;)

8. Browsing Session Resume
Preferred browser for the feature: Opera

My regards goes to Opera guys for coming up with the idea / or at least listening to users feedback and implementing it in the product. Resuming a browsing session which consists of more than one window is really a handy feature. Think about this situation; you are at the end of the day and you have opened some pages which are related to what you are hunting and as of yet you don't know which is the exact page that contains the information you need. Now you have to shutdown the system due to some compulsion. What would have been the solution if you don't have session resume? you can either jot down the url's in a text file or make them a bookmark which you need to erase off after verifying, now enter Opera's session resume option where you just close the browser and shut down the system, when you have again started working you can just open the Opera browser and you get an option to resume your previous session! Voila! You get all the sites open for you at the very same page you left them!

7. TLD filling through shortcut {Shift, Ctrl, Enter}
Preferred browser for the feature: Firefox

This is really a necessity now with the amount of browsing anybody is doing on a daily basis. Nobody would be willing to type the mundane "http://" and ".com"or".net" or whatever TLD for browsing these days. Internet explorer introduced this nifty shortcut where you use the Ctrl+Enter to fill in on the needed stuff for ".com" domains, Firefox went ahead and introduced extended shortcuts for some more (Ctrl+Enter -> .com, Shift+Enter -> .net, Shift+Ctrl+Enter -> .org)

6. Disabling Images / Multimedia Items {Movies on advertisement??? sheeez}
Preferred browser for the feature: Netscape

My most hated stuff while browsing is some site using up your bandwidth for unwanted ads! When you are browsing a site text ads are fine, image ads.... well, that is fine unless it hinders with the purpose of visit, flash ads with movies in them?? Common people, this is not going to suit me and that's the main reason I select to disable images, java applets and other multimedia plug-ins until unless I need them. This feature is kind of half implemented in the current browsers. The main problem in mentioning that images are not to be loaded is fine, but there are some sites for which images are required. For viewing images on those sites the only option with the current browsers is to enable images at browser level, which is not convenient. I love Netscape on this matter that they allow you to set the images / JavaScript’s to be enabled and disabled on the fly when visiting a site.

5. Smart Pop-up blocking and download management
Preferred browser for the feature: Firefox

Pop-up blocking is almost a standard feature in all the current version of the browsers; even then there is some area for improvement. I have come across sites which have effectively bypassed the blockers and have opened pop-ups and pop-under [I forgot the link, will post them. I think it was a movie review site, which I reached through Google search]. And the current pop-up blocking mechanism in Netscape is bit old fashioned, wherein you don't have any option to open a blocked window, and moreover if you are browsing your hotmail junk folder (in IE Rendering Mode) with Netscape it blocks the "Empty" commands pop-up screen (I also tried with Ctrl, Shift keys pressed down).

4. Paste and Go {Well, you paste something on the address bar to actually go there!!}
Preferred browser for the feature: Opera

This feature is so obvious in its level of usage; I wonder why most of the browsers have not implemented it yet. Well, consider this; you paste something in the address bar of a browser to actually visit that address right? Then why don't they give an option (KB shortcut or right-click menu item) to actually paste and go the address in one command? This feature is one of those usability gems from Opera.

3. Tabbed Browsing
Preferred browser for the feature: Mostly all browsers have opted in on this feature

Even though most of the browsers have opted in on this feature there is still some area for improvement on most of them. For example there is tab functionality that is available on Netscape that are not available with Firefox and Opera (double click closing).

2. Multi-level form information storing / submiting {Not another login screen}
Preferred browser for the feature: Netscape

More or less all browsers support automatic form filling either as built-in feature or through extensions. But where Netscape stands out is the amount of flexibility it gives you in form information saving. The user can choose to just save the information or save the information and auto-fill it whenever we come to the form on the web site or if it’s a login screen you can ask it to automatically fill the form and then submit the form too. And this kind of information saving is done through two level of visibility, either for a particular web site or for a default profile which will be available for all the websites. But even Netscape lacks one functionality, you can save only one set of login information for any website, so if you have different email ids for personal and professional use with the same email service provider, then you will have determine which one you are going to save in the browser for auto-login.

The main reason this feature has come up on the ladder is because how easy it makes you to use various online service with minimum typing :)

1. Response and True Status {Click ... click ... hmmmm .. i think its connecting...!!??}
Preferred browser for the feature: Opera (kind of)

This is one area where most browsers have to work extra. As far as I know still there are some glitches in the existing browsers where you get into response issues, I understand it may be associated with scripts running on a page or any other resource hog up. But at the end of it this is the one feature which will either create a smile or a frown on a users face.


As such I use/experience IE, Firefox, Opera and Netscape one daily basis for my development and testing, so my opinions are based on the experience I have gained out of these browsers. There maybe better alternatives which the users like me may not be aware of, in such cases please do let me know about them through the feedback section.

This post originally appeared on an external website

by abs36

Do the author know about Maxthon browser?

May be it is the preffered browser for all above features (except feature 2).

by stew2

Does the author know English or have an editor? Here are just a few mistakes from the first two (!) points:

 - Possessive instead of plural ("developer's"),
 - "Form" instead of "from,"
 - "Move on" instead of "move in,"
 - "Common" instead of "come on,"
 - Run-on sentences, and
 - "A" rather than "an" with words starting with vowels ("a experimenting" and "a option")

I'm
not looking for perfection, but writing an article reasonably well goes
a long way toward fulfilling the goal: communication.

by codecanvas

Sorry for not posting so long, I was in between switching to a new job and just got settled down. Lately as I was wondering how to go about utilizing my personal site I thought it would be a good idea to post some available job offers which I have come to know of in Abu Dhabi. This could be of some help for people who are looking for opportunities in this area of the world. So for the time being I have made a rough page with currently known job openings in Abu Dhabi, please do visit my personal site's job offers page and contact me from there if you feel yourself or one of your friend match the requirement. Thank you.

This post originally appeared on an external website

by codecanvas

Recently was trying out the new urlMappings options of asp.net v2 framework. Though the concept is old and it has been beaten to death through various implementations, it is heartening to see finally the framework is providing a inbuilt solution. But the catch is that the overall support for url mapping is very basic, for instead you cannot use wildcard or regex expressions for url substitution which means you will have to figure out a way to manually enter all the possible mappings.

One more headache which I came across when trying to use url mapping is that it does not allow you to provide mappedUrl's which point to anchored names. For instance if I want to map ~/Category/Car.aspx to ~/Categories.aspx#Car it wont work coz the framework is trying to validate the availability of file named "Categories.aspx#Car" ... duhh!. One workaround I employed for this is to provide a redirection page which will then redirect the user to the proper location;
For example lets take the above example, I create a new Redirect.aspx which just does a Response.Redirect(Request["TargetUrl"]) in the Page_Load and in the mappedUrl section I have provided the url as ~/Redirect.aspx?TargetUrl=/Categories.aspx#Car

The drawback with this approach is that the client should have allowed automatic redirection and also you have to make sure that the redirector page is not used for any other phishing purpose.

This post originally appeared on an external website

by codecanvas

When recently doing a novell to AD / Exchange migration everything was going smooth except for one glitch which came in the end when enabling the OWA's. Out of all the front and backend clusters one front-end webserver started giving this strange “440 Authentication Timeout” error. Its partly strange because I never actually authenticated in the first place to get it expired! Anyway, after googling around I came across a wonderful post at http://msmvps.com/blogs/cgross/archive/2004/08/08/11472.aspx which seemed to tackle the issue. But even after doing the given steps in the post, the problem was continuing.

So after digging the mud for some more time I hit on another forum post at http://forums.asp.net/1164338/ShowPost.aspx which was mentioning about enabling and disabling the Integrated Authentication in exchange system manager. As you would already know, there is no option to do that from ESM, but can be done in the IIS mmc. So, I first enabled the integrated authentication saved the settings, and then again took off the integrated authentication and voila! there came the OWA login page. Quite strange, but it works!  Hope this helps some poor soul looking for a chicken soup.

This post originally appeared on an external website

by codecanvas

[Update 3rd Sep 2005 1629 IST (GMT +0530 hrs): Yahoo no longer has $1.99 domain registration offer.]

It is really a exciting day for me! you see, it all started when I heard about yahoo offering domain registration for $1.99  (info from Sören 'chucker' Kuklau), I was very excited and opted to the yahoo page for registering my wanted domain name. After searching through the domain availability and getting over the fact that the .com version has already been taken, I choose .net tld and opted to book it for 5 years. This took me to Yahoo wallet, which asks for the CC details which I was more than happy to provide, but only if yahoo is ready to proceed further my day would have been more happier.

To clarify, there isn't any problem with the card (as I have purchased products online before and also yahoo does not complain about the card) but the only issue is that I really don't know what the issue is!

Well, let me explain in more detail now, once you reach the CC section and provide your information and press the "Continue" button all you get is a refreshed screen of the CC entry page! No errors, no information why I am still stuck there, but simply it does not proceed further. To make sure that I am able to get error message I wantedly emptied some mandatory fields and pressed continue for which there was a yellow colored error message box shown by yahoo, but when all are filled and ready it just simply doesn't proceed further.

After digging around for 10 min's, I found that the 'State' drop down list was showing US based states instead of India based states. Well, I tried

  • changing to a different country and then back to India
  • opened the wallet in different browsers (opera, IE, FF, Netscape)
  • cleared my cookies / temp internet files and such and did the above two points again

Finally I went to Yahoo India and searched for wallet service localized for that region, but couldn't find any and now wondering what other options I have.

I personally think small(?) hitches like this are the ones which makes the difference in experience between service which attracts users to use it and a service which forces a user to use it because he/she does not have any other option other than to compromise on comfortability for getting what he/she wants.

Finally, as of now I am planning to drop this non-ending madness to try to figure out a way and make use of godaddy. My only disadvantage would be that I could have booked the same domain for 5 years instead of less than that, if only yahoo had worked!

This post originally appeared on an external website

by codecanvas

It was nice to get comments on my previous Yahoo! wallet troubles post, it has brought to light that the trouble is not an isolated incident. What's more annoying? Yahoo! support really sucks and the problem it is not fixed yet. As Jasmid Afshar has commented, the security key resetting option no longer works (it has been 10 days as of this article's date since I submitted a request for key reset - tried 3 times in intervals of 2 days each time).

I guess it looks more like a empty publicity stunt from Yahoo! to just advertise about low cost products and not allowing users to buy them or Yahoo! wallet is not looking into making profit in the foreseeable future and they just want to have a online store since others are having one!

Thanks for Pearl Fox, Hab, Zach, Jay and Jasmid Afshar for their feedback.

This post originally appeared on an external website

by codecanvas

As if usual problems arent complex enough my Visual Studio 2005 stopped displaying DataSet's that were designed and were working very recently. When I open my visual studio solution / project which already has an DataSet open I will get the following error dialog


[
Load DataSet Error
Failed to load dataset because of the following error:

Value cannot be null.
Parameter name: project
]

and the following error message

 

One or more errors encountered while
loading the designer. The errors are listed below. Some errors can be fixed
by rebuilding your project, while others may require code changes.


Value cannot be null. Parameter name: project

Hide    

at
Microsoft.VSDesigner.VSDesignerPackage.GlobalConnectionService.Microsoft.VSDesigner.VSDesignerPackage.IGlobalConnectionService.GetConnections(IServiceProvider serviceProvider,
Project project)
at
Microsoft.VSDesigner.DataSource.DesignConnection.GetConnectionFromAppSettings(String objectName, String propertyName)
at Microsoft.VSDesigner.DataSource.DesignConnection.get_ConnectionStringObject()
at Microsoft.VSDesigner.DataSource.DbSource.set_Connection(IDesignConnection value)
at
Microsoft.VSDesigner.DataSource.DesignDataSource.SetConnectionProperty(Source source)
at Microsoft.VSDesigner.DataSource.DesignDataSource.ReadXmlSchema(DataSourceXmlTextReader xmlReader)
at Microsoft.VSDesigner.DataSource.DesignDataSource.ReadXmlSchema(TextReader textReader)
at
Microsoft.VSDesigner.DataSource.Designer.DataSourceSerializationService.DeserializeToDataSource(String filePath, Object serializationData)
at
Microsoft.VSDesigner.DataSource.ProjectDataSourceDescriptor.LoadDataSource()
at Microsoft.VSDesigner.DataSource.ProjectDataSourceDescriptor.Init(IServiceProvider provider, IVsHierarchy primaryHierarchy, UInt32 primaryItemId,
Object primaryDocDataObject, UInt32 docCookie, IVsInvisibleEditor invisibleEditor, IDesignerHost host)
at
Microsoft.VSDesigner.DataSource.ProjectDataSourceStorage.EnsureInvisibleEditor(ProjectItem dsProjectItem,
Boolean ensureWritable, Boolean createInvisibleEditor)
at Microsoft.VSDesigner.DataSource.ProjectDataSourceStorage.GetDataSourceInternal(Object
caller, ProjectItem dsProjectItem,
Boolean ensureWritable, Boolean createInvisibleEditor)
at
Microsoft.VSDesigner.DataSource.Designer.DataSourceDesignerLoader.HandleLoad(IDesignerSerializationManager serializationManager)

Occording to SOP, first I closed the dataset file (xsd) and tried opening it again in the editor, at which time I would get another error message in the following format:


[
Load DataSet Error
Failed to load dataset because of the following error:

Object reference not set to an instance of an object
]

and the following error message

 

One or more errors encountered while
loading the designer. The errors are listed below. Some errors can be fixed
by rebuilding your project, while others may require code changes.


Object reference not set to an instance of an object.

Hide    

at
Microsoft.VisualStudio.DataTools.Providers.OleDB.OleDBUtilities.GetRegisteredProviders()
at
Microsoft.VisualStudio.DataTools.Providers.OleDB.OleDBUtilities.ExpandProvider(String
provider)
at
Microsoft.VisualStudio.DataTools.Providers.OleDB.OleDBUtilities.GetDataSource(String
provider)
at Microsoft.VisualStudio.DataTools.Providers.OleDB.OleDBDataSourceSpecializer.DeriveDataSource(String connectionString)
at
Microsoft.VisualStudio.DataTools.DataServices.DataProvider.DeriveDataSource(String connectionString)
at Microsoft.VSDesigner.Data.ProviderManager.GetVsDataSource(String invariantName, String connectionString,
Boolean encrypted)
at Microsoft.VSDesigner.Data.ConnectionString..ctor(String providerName, String connectionString)
at
Microsoft.VSDesigner.VSDesignerPackage.AppSettingsHelper.GetConnectionsViaDataEnvironment(IDataEnvironment dataEnvironment)
at
Microsoft.VSDesigner.VSDes

This post originally appeared on an external website

by codecanvas

Microsoft developers have posted information on windows vista blog mentioning the reason for taking down the windows vista torrent that was posted by Chris and Jake recently. I personally agree with the most of the comments users have posted there, people downloading beta are not inexperienced end users but rather experienced developers. With that demographic in mind they could have easily stated the hash for the actual vista ISO in order for the users to verify their downloaded copy. I guess this is a classic case of MS flexing the muscle at the wrong people and then trying to be innocent about their methods.

This post originally appeared on an external website

by georgeou

I can see both sides of it.  Yes it's posible and easy to check the ISO hash.  It's also likely that most people won't check it.  Unfortunately, there is no easy way I'm aware of to digitally sign an ISO.

by codecanvas

I know I haven't said a lot lately in my blog, its mainly due to the current workload. Keeping the client / reader base intact is a resource demanding task, you gotta do what you gotta do with your work life then you have to do what you gotta do with your personal life and then you have to keep your blog ticking; well it is demanding.

Thinking of maintaining the client base I remembered back in India I was an avid reader of a IT / Lifestyle magazine named CHIP / Digit (initially they were named CHIP and for some reason they renamed their name to Digit). It was quite an interesting magazine which covered width and breadth of computing in the initial stages and then went on to cover all things electronic. Everything was good except for the way they had their subscription model setup, they used to annouce value added products / services which accompanied the magazine subscription. For example you would get a gadget free if you subscribed this month, then when you got the next issue they would have annouced of giving away a more attractive gadget and maybe a book along with it. Early subscribers used to write to the magazine asking if they are getting the new products as well, for which the magazine will reply that it wasn't the case. I don't know about you, if I was an early subscriber I would be upset for sure. So, since I was awaiting my travel plan confirmation to UAE and I wasn't sure if that was the right time to subscribe I never happened to subscribe for the magazine. It's been a long time since I read it and when I recently saw the latest issue in UAE newsstand I felt the old memories coming back. Well, now it seems they have introduced loyalty program where you log on to their server and prodvide a 16-digit unique code every month to earn reward points using which you can redeem gifts. I guess this model would work out better for long time readers, but since now I have subscription to other magazines which cover speciality areas I am not too inclined to take up the subscription, maybe some other time!

Whats the point of all this you may ask ... well, as I told you its just a rant.

[Listening to: Otherside - Red Hot Chili Peppers - (4:15)]

This post originally appeared on an external website

This discussion is closed to new replies.