Discussion Locked

Collision on ethernet

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
when your ISP tells you that you have a collision on your network and it's comming from your ethernet side, how can I get rid of this collision?

1 reply

by scottaw

More offten it is a NIC that is the problem. A NIC can work correctly on a network and than have a broadcast issue on an internet avalible network. Watch the hub/switch and see if one of the port is working more than the others. Pull that one and see if it stops. If the ISP is only seeing it occationaly, it is more than likely the NIC, if they see it all the time disconnect the network and leave only the server. This should tell you where the problem is. If is still there, it's not you, it's them. ( they won't admit to anything until it starts working)

This discussion is closed to new replies.