Replace the Power Supply with a Known Good one or remove the PS from this unit and test it in another computer to make sure that it actually works.
LED's and Fans spinning don't mean that the PS is OK it at best just means that there is sufficient power available to spin a fan but in no way implies that the 3, 5 or 12 V DC Rails have the right voltage or current available.
If that works remove the RAM and see if you hear any beeps from the M'Board when you turn it on. You should hear a series of Beeps informing you that there is no RAM present. If you hear the Beeps turn off & replace the RAM then turn back on again. If you now hear no beeps the RAM is working. See if you get any display.
If there is no display test the Monitor on another computer to make sure that it actually works and then reconnect it to this computer. If you have a Plug in Video Card undo the securing screw and remove the Video Card then push it back into the Socket on the M'Board. These AGP Plug In Video Cards work loose slightly and part way lift out of the M'Board causing no Video Display.
if none of that works post back with what happened and we'll try to help you further.
Col