6 replies
by kennnn2 Accepted solution
by cg it Accepted solution
not all BIOS's are the same
here's a link http://www.computerhope.com/beep.htm
see the quick links for a rundown.
by charliespencer Accepted solution
by norehca Accepted solution
by thechas Accepted solution
Beep codes can vary by motherboard and are different for different BIOSes.
Please post the full details of your system hardware.
Here is a link to a TR download that list some desktop BIOS beep codes:
http://downloads.techrepublic.com.com/download.aspx?&kw=beep+codes&c=1&docid=172461
The first thing to do, is to shut off power and turn off or unplug the power supply.
Now, look over the motherboard and check every part you added, and every cable connected to the board, at BOTH ends.
If you have several plug-in cards, remove all but your video card.
Make sure that your video card and RAM are fully seated in their sockets.
For basic testing, it is often good to start out with all the drives and drive cables unplugged.
Read the motherboard manual, while your parts may be "compatible" there may be special things that you have to do to use some parts.
Still nothing, Remove the motherboard and make sure that nothing metal is able to touch any of the circuitry on the motherboard. Make sure that any mounting posts are not too big in size and shorting things out.
While not common, defective parts are still a possibility. If any of your parts are "refurbished" suspect them first.
Chas
by kennnn2 Accepted solution
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending