Discussion Locked

computer dead.

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am literally going out on my mind. I have tried everything i can think of to make this thing work. Let me explain what happened

I booted the pc. walked away. it locked. could not three finger salute my way out of it so i hit the restart button. ever since, the pc will not even run the post process. it almost behaves as if the bios was completely wiped.

I have tried pulling and reseating all peripherals, cpu, and ram. I systematically removed and readded all peripherals to try to find a malfunctioning device. nothing has worked.

my hardware includes, asus a7v mother board with duron 750mhz running at 100mhz busspeed.

any suggestions would be greatly appreciated.

21 replies

by thirdhandd

i dont think or at least i cant find a bios reset jumper on the a7v. I really dont believe it has one. so i pulled the cmos battery and left the machine for about 3 days...hoping the electricity would drain and reset the information. this did notwork. Thanks for the suggestion though.

by thirdhandd

i dont think or at least i cant find a bios reset jumper on the a7v. I really dont believe it has one. so i pulled the cmos battery and left the machine for about 3 days...hoping the electricity would drain and reset the information. this did notwork. Thanks for the suggestion though.

by deltree

Unplug all periferals except keyboard and video. Reseat the power to the motherboard.
Reset CMOS. Power up. If you do not get any response, then the motherboard or powersupply is probably fried.
Try using a video adapter from another box.
Try using a power supply from another box.

by thirdhandd

This was the second approach that i took. i posted this question because it just seems wrong that a 3 month old motherboard would need to be replaced after showing absolutely no signs of problems prior. suffice it to say that this did not work. thanks for the suggestion though

by thirdhandd

This was the second approach that i took. i posted this question because it just seems wrong that a 3 month old motherboard would need to be replaced after showing absolutely no signs of problems prior. suffice it to say that this did not work. thanks for the suggestion though

by it_instructor

Try another CPU in the board and your original CPU in another board!

Good Luck!

Remember ESD can mess with you big time!
See it all to often.

by ricrei

I had a simillar problem with a PIII 500 every now and then when I hit reset the computer would die and I could not start it back up. The problem turned out to be an under rated power supply. When it was replaced with a larger one the problem stopped hapening. PS this happened three times to a brand new machine still under waranty

by thirdhandd

My first inclination was that htis was a powersupply problem. so i purchased one that was "optimized for amd" this did not work. this is when i really started scratching my head

by thirdhandd

My first inclination was that htis was a powersupply problem. so i purchased one that was "optimized for amd" this did not work. this is when i really started scratching my head

by awhallam

On a Compac Presario I have the same thing occured. Mine has a jumper to reset the bios to a default setting. If yours has one, remove it for 10 seconds and replace it. Mine worked fine after that

by mhoward

Since it is a 750 Duron - it is probably still under warranty. I have seen this with three of our dell's, and it has been a blown motherboard. Hope this is not the case, but....

by fcrammond

I had a similarly problem the other day. I found that the reset key had become stuck.

by fenaikh

Hi

this may be a caused by many factors:
1- Over heating (use this utility)
Motherboard Monitor for
Windows 95, 98, ME, NT, 2000, XP
http://mbm.livewiredev.com/

2- Power managment (ACPI) problem specialy win98 but not win95 which support (APM).
(diable power managment in BIOS and control panel)
3- Hard disk going to sleep where damage check it with scandisk (paging problems).
4- Motherboard not stable.

5-CPU Overclocking or underclocking.

6- Power supply problem.

7- Voltage up and down.

8- Network hanging (NDPS) with netware could do that. (disable it)

9- NEtwork card.

10 - conflict in resources. IRQ or DMA.
Use MSINFO.

11 sorry for this long answer. but try the first 2 then continue.If this is not enogh pls send me a msg i may have other sloution.

Good luck

Mohamed.

This discussion is closed to new replies.