2 replies
by loraine172 Accepted solution
by hal 9000 Accepted solution
The M'Board always has power to it when it's plugged in so things should light up on the M'Boiard unless the Mains or Power supply has failed completely.
What you need to look for is a flicking of the fans when you attempt to start the computer from the front panel switch. If nothing happens try swapping the Power Supply with a known good one and if that doesn't work the M'Board is the next most likely suspect.
But you can reduce the system to the bare minimam amount of parts that that will consist of the M'Boad, CPU/Heat Sink Fan, 1 X Stick of RAM and a Video Card if there is no onboard Video. Before applying power make sure that the one stick of RAM is properly seated in it's socket and that the Video Card is as well.
If that doesn't work you need to remove everything from the case and inspect it and then try powering it up out of the case if you can not see anything wrong with the M'Board. Sometimes with a new build some cases will prevent Daughter Cards from plugging in coprrectly and stop the system working.
Col
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending