Question Locked

Computer problems... CPU??

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Today I installed a Zalman CPU cooler into my computer, the thing was running fine beforehand, now it will power up as normal but nothing will show up on screen and the loading led won't show up on the front of the case. I took the cpu out placed it back did nothing to it, what could be the cause of this problem???
Thanks
Tim

4 replies

by mjd420nova

Sounds like maybe the power supply isn't big enough anymore.

by thechas

It is very possible that when you installed the cooler that you jarred one of the other components of your system.

Following proper precautions, (power fully OFF, and ESD practices) remove and re-seat your RAM modules, plug-in cards and power connections.

If that does not correct things, try going back to your old CPU fan.

Does the Zalman have a connector that plugs onto the CPU fan connector?

It is possible that your system will not power up if it does not detect a running CPU fan.

Chas

by tim_hodges

Yeah I considered the cpu fan being a problem so i put the old one back in but had the same problem. I'll try and take out the ram, I tried taking all the other components which weren't necessary out but still the problem exists. I don't think the power supply is a problem as i'm running a 500w psu. The CPU fan is connected to the same cable as the previous fan.
The main noticable difference is when i start up the computer everything powers up fine but the blue led indicating somethings happening doesn't show. Plus the usual beep from the in case speaker when i turn on the machine doesn't occur any more.

This discussion is closed to new replies.