Discussion Locked

config Win2kAS for remote home LAN use?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
OK recently I posted a question about peer to peer networking. I was unable at all to get 98 to talk to my LAN - it came down to bad hardware somewhere... i think it was the mother board - connected a new case/motherboard and all fine. Now I installed a server and want to know how to configure it to where (I know this can be done, just havent figured it out yet) I can use the desktop on my main machine I use at home from anywhere on the internet. I do NOT have a real domain (yet) so I am currently working with 'workgroup'. Must I have a domain or domain controller for this to work? I want to basically have this neew computer/server for remotely accessing my home LAN from other locations. I have not configured ANYTHING this time because failed previous attempts have caused data loss. now I am here asking for help. the quality of answers will determine the amount of points this is worth.

4 replies

by mckaytech

You certainly can use W2K Advanced Server for this purpose by setting up RRAS and VPN. The W2K box will act as a VPN server and once you attach to it from the VPN client (probably W2K Professional), you can access your main machine. Microsoft has put together a pretty good Support Webcast on implementing this scenario - you can find it on TechNet by using search terms of "Windows2000" and "VPN".

But really, this is extreme overkill. On the other end of the spectrum, you can run a Linux-based router using LRP software on a surplus 486 with 12meg of RAM and a floppy drive. Run SSH on the Linux box, attach to it with TeraTerm Pro with the SSH extensions, and then use VNC to remotely control your desktop on your internal network. It works cleanly and you could build ten of these systems for less than the cost of one W2K license.

paul

by mckaytech

If you're interested in further information, write to me off the forum and I'll give you a link to more details on a working system.

paul

This discussion is closed to new replies.