Linux

Ask something
Discussion Locked

Configuring DNS on RHL 9

0 helpful
1 reply

by susejbose

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a MS 2000 Advance Server with SP4 as a Master in our INTRANET and we wanted to start implementing a Slave DNS on Linux.
All configurations of the named.conf are correct however when we start named it gives an error "named:rndc:connection failed [Ok]".
In the services it shows bind as started but with error rndc:connection failed.
If we remove the rndc key would it help and how will security be effected?

1 reply

by support

the /etc/named.conf file should have references for rndc.key.
Check to make sure all syntax is right. Should be as below:
include "/etc/rndc.key";

an /etc/rndc.key and an /etc/rndc.conf file should also exist. Normally default settings are fine.

If you don't have these files re-install named to bring the back.

This discussion is closed to new replies.