Discussion Locked

connect two pcs

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have xp on one pc and 2000 professional on other. I have cables with rj45 connectores, ethernet cards installed and I wana know how to connect them:
1. Directly
2. via internet ( i have dsl)

5 replies

by chud

OK
1)You can use a cross-wired RJ45 cable (aka crossover cable) to directly link the 2 pc's - just plug each end of the cable into the network card of the machine.
2)If your DSL modem/router has more than one port you can plug standard RJ45 ethernet cable into each machine and from there to the router. Or if the DSL device has only one socket you could obtain for not many $'s a 4 port hub to provide the connection.

by rcom

As mentioned you have a couple of choices. If you have a highspeed internet connection then it would be best to get a router that has a couple of RJ45 connections. This will help with security.

You can get a 10/100 switch very cheap from a used computer shop. That way you can use normal cat5 cables that will work for everything.

by georgeminton

The easy way is to use the crossover cable or a hub with two regular cables.
Set up a user account on both machines with the same name and password. Login with an account that you have in the administrator group(right click on My Computer, left click on manage, local user and groups and double click on groups. Add the account to the administrators group if you are in that group. If not you will have to have someone put the account in there for you. Choose a domain that has the words (this computer) on the domain line. Once you have logged into the machines go to start run and type
\\machine name you want to go to\c$ or d$ depending on the drive you want to access and you can copy and paste til the cows come home. Both Nics need to be configured to talk at the same speed and duplex or nothing will happen for you.

This discussion is closed to new replies.