Discussion Locked

connecting a DOS PC to windowsNTserver4

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How can I connect a Ddiskless DOS workstation to a Windows NT server 4.0?
Whar all are the requirements for the above?

5 replies

by gra

On the NT CD and at support.microsoft.com are the files you need to boot a DOS PC to an NT Server.

However, you need SOME WAY to get this files onto that PC. Can you plug in a floppy drive temporarily?

If it is a PC in a keyboard and no driveaccess...what is it setup to access?

Glenn

by wirejockey

I'll assume your workstation is completly diskless, ie. no FDD or HDD. This would require a boot chip on your NIC. You would need to create a remote boot configuration on your 4.0 server. If you have a FDD in the workstation, you can generate a bootdisk from the server. The boot disk would need the NDIS driver for your specific NIC and would include the "NET" command, ie. net use //servername/c$. Good Luck!

This discussion is closed to new replies.