Discussion Locked

Connecting My Network to Broadband

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I provide (amateur) support for a small network at my church. Single NT4 Server, Workstations: 6 NT4, 1 Win2k, 2 Win98SE. One of the Win98's runs my backup jobs. One HP8000N workgroup printer and one of those Color copiers with Net interface for printing. All connected up with 100MB ethernet (switch).

I need to connect a broadband internet solution, probably AT&T Broadband, providing connectivity to all stations. Anyone care to sketch a basic approach, at a minimum touching on:
- Connectivity (hardware)
- Firewall (software/hardware?)
- Content Filtering

Thanks.

15 replies

by parvus1202

First, your area should be Broadband enabled, inform your AT&T office. Also you need router/modem hub to connect to 2 or more computer, splitter for tel line so you could use tel while on the internet. You also need filter so your tel and internet will be clear of any disturbance. And each computer should have ethernet card. You don't need to install software to other computer only the server. After you are ADSL connected you should type IP addres to each computer so each will be connected to internet independently. Your ISP, AT&T, will give you full instructions on this.

by mrjay67

As far as hardware connectivity it depends on what you are able to spend(actually it all depends on what you are able or willing to spend). You can get a simple linksys or similar broadband router/switch. You can get sigle port for use with an additional hub/switch up to an 8 port(maybe more w/ other brands). A switch will provide better speed. In your situation I would get a 4 port that includes firewall and VPN. Add at least an 8 port switch to provide enough conectivity with the router.

You can get software firewalls but that is just going to take up more resources that you dont need to on the PC. Some options include BlackIce defender, ZoneAlarm, and Norton firewall. These are probally some of the better ones but there are allsorts out there. Hardware is the way to go and linksys has a great option as I mentioned above. There are other options/brands with different features but all depends on exact needs. I suspect with the small setup you have you dont need much more.

You could bump up to Cisco options. They are a leader in network hardware. But they come at hefty prices and are designed usually with larger networks in mind. Their switches/routers and such provide greater options and configurability but easily spend 2-3 times that of linksys or other similar options.

I havent researched filtering and havent had a need for it yet. There are many different options for this as well though and just need to do a search for it. You might check Norton software out and see what they offer. The ones I know of are cybersitter(origianly geared towards parents) and surfwatch.

Hope this helps. Its just a basic concept and I can provide more details if you would like.

Jason

by mrjay67

I forgot you mentioned you had a switch. You could use the existing switch and just get the router/firewall. There are also wireless options you could consider. Personally I would get the 4 port for easier expansion. The router can/will do all the IP configuration.

by timwalsh

So far, answer 2 provides the most complete (and correct) answer.

To expand a little on that answer:

1. With a Broadband connection, remember that you essentially have an Internet connection open 24 hours a day unless you turn off ALL computers/servers when they aren't being used. Because of this I always recommend a hardware firewall in this situation.
2. You WILL need a router of some sort to connect your present network to the AT&T Broadband (ADSL?) modem.
2. With the size of your present network, unless you have some special circumstances which you didn't mention, you can get by with one of the many Broadband (DSL/Cable) Routers on the market from vendors such as Linksys, Netgear, and D-link. Almost all of thier DSL/Cable Router products also act as firewalls, which by default block ALL incoming connections not initiated by one of your users (i.e. initiated by outsiders trying to "browse" your network).
3. You already have a switch, so it is up to you whether you buy a router with a built-in hub/switch, or one without. The price difference is generally that of the vendors hub/swith of the same capacity.
4. If your computers don't presently have it installed, you need to add the TCP/IP protocol to network properties (probably only applies to the Win98 boxes. TCP/IP installs by default on NT4 and Win2K.)
5. If you are presently running DHCP on your network, I would consider disabling it and using the DHCP capability of the Router/Firewall. If you do this, make sure you give at least your server static IP in the same subnet.
(continued)

by timwalsh

6. Content filtering: This depends on what your intent is as well as the maturity level/trustworthiness of your users. I'm assuming you are talking about limiting the ability of your users to access inappropriate sites. Answer 2 provides one solution; there are many others out there. None of them are perfect. As vendors of these products update their filters and filtering algorithms, those who run websites you would probably consider inappropriate think up new ways to bypass content filtering software. You need to decide how much time, effort, and money it is worth to you to protect users from them selves (obviously, if children are involved, it is probably worth the expense).

Hope this helps.

by shmaltz

Connectivity and Firewall
You can purchase a DSL/Cable router to share the Internet connection. This is very easy to setup, and cheap (around 80.00USD), and it does the job.
For Content Filtering (I assume you mean for web contenet and not just email):
You can either install programs localy on the computers that will do that for you (this however requires that every workstation download an update every day), or you can install a more expensive Router that gives you the option to filter (one such router made by 3Com is the office connect firewall). Or you can try a provider that will give filtered Internet access based on what you want filtered (one such provider is JNet at www.thejnet.com, the server the New York Metro area, I don't know about any others).

This discussion is closed to new replies.