Discussion Locked

Connecting Netware 3.12 & 5.0

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are planning to connect a Netware 3.12 network and Netware 5.0 network together and subsequently add a MS SQL Server on the Netware 5.0 network. Does anyone forsee any problems with this

7 replies

by dcassat

I have worked in Novell/Microsoft mixed enviroments quite a bit and have had no problems. The servers all have to use IPX and be set to the same network number to keep things simple. Also, I recommend that you keep the usernames and passwords of the Novell and Microsoft systems the same. This will keep the login from going wacko on you.

Good Luck!

by jason.brimhall

I would suggest upgrading the 3.12 network since this is Novell's suggestion afterall and they are preparing to do away with it and support for it. As for the protocol to use, I would recommend staying IP. NW 5 fully supports IP now and can run without IPX installed. This would work best of course if you make that upgrade from 3.12 to 5. Fewer problems would be encountered by doing so. I have been administering NW5, NW3.12 and NT4 and NT 2000 network for just about a year now. Novell instructed to get rid of the 3.12 and go 5. The only problems I ran into were when i was trying the IPX thing. 2000 didn't take too kindly to it. I was also running Citrix on one box and SQL 7 on two other boxes. SQL worked like a charm. The networkalso ran much better with 3.12 gone and going straight nw5. Just FYI

by sprows

I agree that having a pure environment would be the best long-term solution, however I have been a Net Admin over a hybrid NetWare\NT LAN for almost two years. We have upgraded a few of our servers to 5.1, but we still have 3 3.12 servers, about 104.2 servers, and about 10 5.1 servers. These servers are being run in conjunction with an NT domain and 2 2000 servers. We haven't had any major problems with this setup. However, management of this network is more labor intensive. So to make a long story even longer...here's my 2 bits. Your network will work just connecting the two and that will be your cheapest solution, however for the long run an upgrade of your 3.12 server will make your network easier to administer.

This discussion is closed to new replies.